koolrayz

iTrader: (26)

Category: Accessories
Price: $300
Location (State): OH
Item Condition: Brand New
LS Engine?: Fits LS Engine

The springs are the K-motion K-800 1.460 diameter, they are setup for .650 lift and had over 200# on the seat. The rockers are Harland sharp but they have a custom girdle that Kurt Urban made to tie them together. This eliminates the issues many people have with the Harland Sharp. The intake valves are titanium The super alloy exhaust valves are not inconel but are a high nickel high carbon alloy. A lot of people pass them off as inconel these days. I don’t know the flow numbers but I bought these heads from Mark Koehler last winter. He got them in September so they only had a few races on them. He went 7.50 with this head and valve train combination. This head and valve train holds the record for LS engine hydraulic rollers. I raced them all last year so they are only a little over a year old. The pushrods are 3/8" Manton’s IIRC. The heads also come with the ARP washers machined into the heads to keep the aluminum from distorting. The heads are opened up in the push rod area to allow room for the big push rods. The heads have the wire installed by ERL for a double oring system.
I did put new springs and a valve job on these last winter.
I am thinking $3000 plus shipping is a killer deal on this package. As you can see this comes with a lot of extra’s. I forgot to include the throttle cable but will include it with the elbow. The Arrons elbow and 90mm nick williams throttle body can be included for an additional $350


Breakdown of repacement costs
heads from Trickflow 2,500.00
upgrade valve springs and machine work 300.00
push rods 400.00
Harland Sharp rockers 350.00
custom girdle that ties them together 200.00
titanian intake super alloy exhaust valves 1,000.00
trick flow valve cover spacers 200.00
O-ring machine work 300.00
port matching intake to heads 200.00
intake and fuel rails 350.00
Fuel lines 200.00
ARP washers with machine work to install them 100.00
Total 6,100.00

smok'nZ

iTrader: (160)

killer deal GLWS

70 gsconvt

Are these LS1, LS3, or LS7 port heads?

koolrayz

iTrader: (26)

They are a cathedral port head
http://www.trickflow.com/partdetail....4&autoview=sku

koolrayz

iTrader: (26)

Bumped

koolrayz

iTrader: (26)

bumping