View Full Version : First Dyno on my new '02 WS6

02-06-2012, 09:02 PM
Well, got my suspension installed and installed my SLP Loudmouth 1, Intake and Bellow and had my computer tuned by Frost. We did 3 runs, the first one I hit the 6200 limiter (you can see it in the first video), so he lowered the computer requirements to 5900 and ran the next three runs like that. First two runs were okay but my 3rd was the best (surprisingly because normally its your first) I ran a 336.9 Max HP, 324.5 with WCF. Max Torque was 373.7 at 2840rpm and 359.9 with WCF.

I'm pretty happy with the results since this is just my baseline, the car does have 92K miles on it. Also, in the first video I can tell it's been a while since the car has been run this long and hard because she was just bellowing out the black smoke but in the next 3 runs my wife recorded and she didn't smoke as bad (you can see it in the second video).

Dyno was done on a Mustang Dyno by Auto-Motion in Louisville, KY. With AFR along with the dyno the total was only 85 dollars for the 4 pulls (they usually do 3 but we had to adjust for my rev limiter). I worked with the owner and he was real helpful and let me run the car, A+ shop for the locals.

First run hitting the Limiter and black smoke bellowing out:
First run (

Last run and best run giving me above results:
Best Run (

02-06-2012, 09:17 PM
Well I was reading some others post and realized I should of run it in 3rd gear, we ran the car out in 4th... Wondering if this would of effected my results much.

02-06-2012, 09:20 PM
Nevermind we were right 4th gear is okay to pull in because I have a T56 thats where my 1:1 is.

02-06-2012, 09:42 PM
Good numbers and nice looking car!!

02-06-2012, 09:44 PM
02' ws6 ftw!