Dynamometer Results & Comparisons - Ls2, tfs 225's, eps cam and fast 102

stock shortblock ls2, trickflow 225's with ls3 valves/ powder metal guides/milled to 61cc, stock rockers with the trunion upgrade, eps 230/238 .600/.604 112+2, fast 102 with 92mm throttle body, intake has been port matched to the heads, 4' cai, powerbond u/d pulley, 1 3/4 stainless works longtubes and a 3 1/2 inch cutout, 6 speed and a 8.8 with 3.55's. im pretty happy with the setup i needed a bigger camshaft but ill let the eps cam stay in it, may do nitrous down the road. first graph is just my sheet, second graph is comparing my graph(blue) to a ls1, tfs 215's, vindicator cam and a 90mm(red) this dyno is also a heart breaker :cool:
http://i1000.photobucket.com/albums/af127/1nasty86/Mobile%20Uploads/2012-02-18_102431.jpg
http://i1000.photobucket.com/albums/af127/1nasty86/Mobile%20Uploads/2012-02-16_101006.jpg

Solid looking numbers from a "heartbreaker" dyno. I'm loving that torque curve.

Torque curve is very full. Much more usable powerband than the old engine.

The dyno it was dyno'd on was a 224lc with eddy current loader if it makes any difference

Great torque curve, glad to see usable power instead of just high numbers

Great torque curve, glad to see usable power instead of just high numbers

i think the numbers were not better because if cam size... its just alittle 230/238 :cool: