View Full Version : How would this Cam Perform..


swain
02-22-2012, 06:57 PM
GM Performance Parts 88958733 LS Hot Cam

I have a stock LS1 with 853 heads. Will be running a GM performance Intake with Holley 750 Carb. Any pointers would help. I have the cam, but not the Valve springs yet. Will the stock ones be too soft?

1badeagle
02-22-2012, 07:29 PM
Whats the lift on the cam?

swain
02-22-2012, 07:31 PM
88958733
LS Hot Cam
I: 219 E: 228
(1.7 rocker) I: 525 E: 525
112 Same cam as in kit P/N 12480033

1badeagle
02-22-2012, 08:48 PM
Id say stock spings are fine, but it wouldnt hurt to upgrade. I would look into a set of yellow gm springs.

speedtigger
02-22-2012, 09:08 PM
The dyno tests I have seen show that the stock springs are not even good enough for the stock cam. Most guys like the PAC performance springs. The 1218s should be nice for you.

89gmcs15
02-23-2012, 11:25 PM
i got a set of brand new ls3 springs locks and retainers.. throw me a few chips and pay the shipping and their yours. pm me if ya want them.