Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

knocking after intake removal

Thread Tools
 
Search this Thread
 
Old 03-21-2004, 01:46 PM
  #1  
TECH Fanatic
Thread Starter
iTrader: (-1)
 
98sspullin'em's Avatar
 
Join Date: Nov 2002
Location: Southeast Texas
Posts: 1,178
Likes: 0
Received 0 Likes on 0 Posts

Default knocking after intake removal

i was taking my intake off to look at my heads and when i put it back on and started up my car, it was running real rough and when i went to raise the rpm's i heard i cling and i shut it right off... i took everything back of thinking it might have been a socket but would a socket fit under the valve?? it would have been about a 10 mm socket?? i checked the valves and couldnt see any damage and i even got a mirror to look and still didnt see damage??

so could a socket fit under the valve and what else could it be??? thanks
Old 03-21-2004, 01:55 PM
  #2  
Q
TECH Enthusiast
iTrader: (18)
 
Q's Avatar
 
Join Date: Nov 2001
Location: Chicagoland
Posts: 576
Likes: 0
Received 0 Likes on 0 Posts

Default

Check your PM's...are you missing a socket? Tear it apart and double check it again...and if all else fails, the gaskets are cheap!




All times are GMT -5. The time now is 08:16 PM.