FRC vs c6z/ Viper SRT vs c6z
#1
Teching In
Thread Starter
Join Date: Sep 2011
Location: From San Antonio TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
FRC vs c6z/ Viper SRT vs c6z
#3
Teching In
Thread Starter
Join Date: Sep 2011
Location: From San Antonio TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
The FRC doesn't have good low end. But it was fun no doubt... I'm trying to get the FRC guy to put a 100-125 shot on his car.
Trending Topics
#8
People dont get that. A 450 rwhp 7.0l will dust a 450 rwhp 5.7l everytime if equal weight.
That viper guy drove his *** off. Lots of props. Its pretty rare to see a owner start that hard and shift that fast in a viper. The vettes 200 pound weight advantage showed up in the later gears and ran the viper down but damn that was impressive driving
That viper guy drove his *** off. Lots of props. Its pretty rare to see a owner start that hard and shift that fast in a viper. The vettes 200 pound weight advantage showed up in the later gears and ran the viper down but damn that was impressive driving
#10
Teching In
Thread Starter
Join Date: Sep 2011
Location: From San Antonio TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
No driver mod needed just some nos! The c6z has the tq in the right places. That c5 is a slug down low. The viper ran harder then I've seen the other ones run in town. All and all they had a good time.
#15
#16
Teching In
Thread Starter
Join Date: Sep 2011
Location: From San Antonio TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
#18
Teching In
Thread Starter
Join Date: Sep 2011
Location: From San Antonio TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts