Will ford 39# injectors be enough for a stroked 427?
02-24-2012, 12:28 AM
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Jul 2006
Location: NOLA
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Will ford 39# injectors be enough for a stroked 427? Got a project going on, and i need to get parts together as quicly as possible. The previous owner of the long block had ford racing 39# injectors....should i bump up to something bigger? If so, what kind?
(I also have an upgraded fuel pump that i will be installing, so no worries there)
Ive been doing some reading and it seems that the ford injectors flow at a different (lower) pressure than gm injectors, so the ford injectors can actually flow beter than a higher number gm....is this true? If so, should i just keep these?
I checked out the calculator for injector sizing, but i didnt even know where to start bc im not sure of the pressures and such, so any help would be greatly appreciated.
(I also have an upgraded fuel pump that i will be installing, so no worries there)
Ive been doing some reading and it seems that the ford injectors flow at a different (lower) pressure than gm injectors, so the ford injectors can actually flow beter than a higher number gm....is this true? If so, should i just keep these?
I checked out the calculator for injector sizing, but i didnt even know where to start bc im not sure of the pressures and such, so any help would be greatly appreciated.
