View Full Version : msd6010

richard david
02-24-2012, 10:40 PM
I was reading on another post about having to swap wires around on cam sensor plug just wandering why and if this was something I needed to do on mine.

Pop N Wood
02-25-2012, 10:04 AM
Only if it was accidentially wired wrong from the factory. Most guys just plug them in and they work fine right out of the box.

02-25-2012, 02:54 PM
The 6012 for the 06 up engines has to have the two outside wires for the cam sensor swapped if the stock GM extension harness is not used.