11 Second Club - Went 11's in my bolt on 08 corvette

Did 1.745 60ft into 11.94. The other car was a 08 GT500 with a pulley 3.73 gears and intake pushing over 550 hp.

My car is a 6 speed manual and has headers, tune, and intake other wise everything else is stock. Plus the DA was 1100 and around 75* Still learning to shift this thing and it wasn't my first time at the track, but practice makes perfect.

Nice job!!!!!!!!!!!!

Thanks man, it really take practice to run these M6 cars especailly a vette with IRS. Next time out goin to try to get a 1.6 60ft to see if it helps more.

I ran against an 08 GT500 this next slip shows how close we were. After this run he came over to me and said wow that was a great run between the 2 cars and you can really shift that vette man. I got the better 60ft but he just rolled on in.

congrats man..

Congrats!

Congrat's runs good on the top end.

Good run, did u dyno your vette?

Congrats on the time! Man was that last run close with the GT500. He had a nice mph too.

I think if you get your 60' down to a 1.6 and work on your shifting a little more you'll be in good shape :)

congrats !!

Good run, did u dyno your vette?

Wow din't know post was still up yes, it dynoed 415 rwhp and 430 tq. I have the sheet on here somewhere.

ok here is the post on the dyno.

http://ls1tech.com/forums/dynamometer-results-comparisons/1389002-2008-6-speed-manuel-vette-dyno-bolt-ons.html

Just double click the graph a few times for it to enlarge.

Congrats on the time! Man was that last run close with the GT500. He had a nice mph too.

I think if you get your 60' down to a 1.6 and work on your shifting a little more you'll be in good shape :)

Thanks man, yea that was his time, then he ran an 11.65. I could of prob have gotten a lil better. I was only reving it to about 5200. If I would of reved it to about 6000 off the line I am sure I would get the same time as him. This is just a base line for me.