Need some help wiring up my DBW/TAC plug..
02-27-2012, 12:22 PM
#1
Registered User
Thread Starter
iTrader: (10)
Join Date: Apr 2009
Location: Oviedo Fl
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Need some help wiring up my DBW/TAC plug.. Ok, I've got almost my whole harness loomed/wired up. Down to where the Tac plug/wires feed into the main "trunk" I've been trying to follow the schematics I Have but it's kickin my ***.... haha
I have 4 wires left, as seen in the photo.
Colors are (left to right)
Gray
Gray/black stripe
Dark blue
Light blue
There was a pink, but I tied that into my "keyed 12v" wiring.
My assumption was the gray goes into the trans? I'm running a NON computer controled trans, so everything but the engine stuff has been removed.
I can only assume the blue wires are cruise control, however I dont know nor am I confident enough to cut/modify them yet.
Anyone got some pointers?
Supposed to be an 02 LQ4, I'm begining to doubt the year... definetly a red/blue PCM with DBW harness though.
I have 4 wires left, as seen in the photo.
Colors are (left to right)
Gray
Gray/black stripe
Dark blue
Light blue
There was a pink, but I tied that into my "keyed 12v" wiring.
My assumption was the gray goes into the trans? I'm running a NON computer controled trans, so everything but the engine stuff has been removed.
I can only assume the blue wires are cruise control, however I dont know nor am I confident enough to cut/modify them yet.
Anyone got some pointers?
Supposed to be an 02 LQ4, I'm begining to doubt the year... definetly a red/blue PCM with DBW harness though.
