View Full Version : little88 provides no invite to dyno day! but is called out by chrs1313 for next RSD!


Pages : [1] 2

xpndbl3
02-27-2012, 03:52 PM
WELLLLLL ZEKE? did it happen? I didn't get a phone call of it running....just sayin



:eek2::corn::secret2:



:sack:

THEE PEWTER Z
02-27-2012, 04:32 PM
Subscribing lol

litle88
02-27-2012, 04:33 PM
Lmao

Shit Steve talk about a callout! Wtf! :jest:

Shit even chris1313 called text me asking about dyno numbers and shit!

Lol no waiting on some parts still but it looks like ill be getting work done on Friday and Saturday to get it INNNNN! Who's coming? Chris1313 better bring his narrow azz lol.

That's the status sir, waiting on my lid and fuel injectors and D/s and cutouts.

litle88
02-27-2012, 04:40 PM
Hey YO PAULY!

02sleeperz28
02-27-2012, 06:00 PM
Damn race cars take a long time to build!

THEE PEWTER Z
02-27-2012, 06:20 PM
Zeke i plan on getting it in aswell saturday lol

litle88
02-27-2012, 06:49 PM
Cooooo

xpndbl3
02-28-2012, 01:09 AM
NONE of those things stop you from having the motor/ trans IN THE CAR ZEKE!!!! quit slacking!

Formula WS6
02-28-2012, 08:21 AM
Hey YO PAULY!

You rang?

02TransAm/Batmobile
02-28-2012, 10:59 AM
What's going on?

litle88
02-28-2012, 11:57 AM
Paul lol I was shouting to theepewterZ, but hey you too! Why not lol

Batmobile Steve is talking about me working on my car this weekend! It's going in or BUST!!!

Chris bring your Lil azz over! Need help with the bumper lol

xpndbl3
02-28-2012, 01:36 PM
ya paul you're not paulie!!! lol even though zeke does love you both

THEE PEWTER Z
02-28-2012, 01:46 PM
zeke ill think u guys while im workin on project forced seduction

litle88
02-28-2012, 04:17 PM
Yummmmmm you put the sensual in consensual Pauly!

I lika dis boo!

litle88
02-28-2012, 04:23 PM
ya paul you're not paulie!!! lol even though zeke does love you both

Yes but I love Paul a lil more.

THEE PEWTER Z
02-28-2012, 04:28 PM
Im hurt waaaaaaaaa lol

xpndbl3
02-28-2012, 06:00 PM
he sure spends a lot of time on tech instead of in the garage finishing his february project ;)

litle88
02-28-2012, 06:06 PM
Sir you know I have TWO FULL TIME jobs and I'm currently working the side job. Luckily I have a nice Lil iPhone that sends these cute Lil emails when anyone posts on this thread because you guessed it, I'm subscribed. The only day off I get are Fridays and sometimes Saturdays til 4 pm. Jeeeeezus

:jest:

Formula WS6
02-28-2012, 06:15 PM
It's ok Zeke you can cry. We're here for you.....

88monte
02-28-2012, 06:19 PM
what can my daily driven soccer mom car get? it has a bad coil and a cat back

litle88
02-28-2012, 06:20 PM
Lol thanks bud, see Pauly? That's why I love him more lol
All you think about is "forced seduction".

litle88
02-28-2012, 08:58 PM
Daaaaaaaamn!!!

Well wifey just told me you know cause I don't have shit to do! I'll be at key lime cove this weekend!!!!
Shhhhhhiiiiiiiittttttt!!!

Umm Steve can I get an extension? Or another deadline? Please?

THEE PEWTER Z
02-28-2012, 09:41 PM
No rotflmao thats my project name for the z. I topd u guys six years ago my plans for this car and no one took me seriously. Well its gettin it so i can keep up with u buttercup. Enjoy that alert muhahaha

litle88
02-28-2012, 09:44 PM
Lmao! Really?

xpndbl3
02-29-2012, 01:52 PM
Umm Steve can I get an extension? Or another deadline? Please?

oh i got an extension for you! :hump::sack::gay::gay::gay::D


When I make up the zeke: fail T-shirts who wants one?

litle88
02-29-2012, 02:19 PM
Daaaaamn!

Steve can I get any kinda love from YOU?!?!

So I won't "fail" why don't you guys come over next Friday and Saturday? I'll have food and beer, how's that?

xpndbl3
02-29-2012, 03:52 PM
oh zeke you got nothing but love coming from me :secret: I just am picking on you because you've blown your schedule wide open, then set a DATE for it finished. :lol: I'm sure this lovin' makes you want to finish it even more, so i'm motivating you. I'm all about food and beer, let me know when to show up, if I'm not on the lake fishing already.

1_bad_TA
02-29-2012, 09:41 PM
WTF? no invite for me?

litle88
02-29-2012, 09:46 PM
Anthony you know it's open to ALL!!!

1badWS6
02-29-2012, 11:39 PM
^^^That's Jim dummy....


<-----Anthony


:)

xpndbl3
02-29-2012, 11:48 PM
ya don't make that mistake again!!! lmao


herro anthony, where's this beer thing at

jakes4321
03-01-2012, 12:20 AM
what can my daily driven soccer mom car get? it has a bad coil and a cat back


I will take some action with my soccer mom mobile, I will leave the baby seats in.

litle88
03-01-2012, 05:39 AM
Lmao! Hey I was a Lil tipsy last night I'm Sorry but with all these imbad and badthis and badthat shit I got them confused one time!!!

Jimmy of course, Anthony yes, Paul naturally, Pauly seduses, Jake!! Stop hustling the soccer moms in my call out thread :jest: and yes you can too. :jest:

xpndbl3
03-01-2012, 02:26 PM
at least you never screw up who i am ;)

88monte
03-01-2012, 06:37 PM
I will take some action with my soccer mom mobile, I will leave the baby seats in.
ill even stay on street tires :drive:

xpndbl3
03-01-2012, 08:03 PM
it's official.....zeke is WAY behind schedule!

1badWS6
03-01-2012, 08:19 PM
I'm only coming if there's hookers and blow.

88monte
03-01-2012, 08:23 PM
I'm only coming if there's hookers and blow.

im with this guy!

1_bad_TA
03-01-2012, 09:32 PM
They have the right idea. Zeke better have party favors.

jakes4321
03-02-2012, 03:41 AM
ill even stay on street tires :drive:


Lol its a mom mobile I only have street tires...

95th street with the slow slugs haha

88monte
03-02-2012, 01:29 PM
Me too and I'll even put a baby seat in mine to be fair lol

THEE PEWTER Z
03-04-2012, 12:24 AM
So wheres the pics of the motor jn there huh? Its sunday

xpndbl3
03-04-2012, 12:50 AM
~like~

TORCHD 02 TA
03-07-2012, 03:23 AM
just passing through....

litle88
03-07-2012, 05:44 AM
It's on Friday........ No ifs and or buts biaches!

I'll be starting in the morning.

THEE PEWTER Z
03-07-2012, 10:43 AM
Ba bah bulshit . Excuse me

litle88
03-07-2012, 04:50 PM
Very mean Pauly!

No respect!!

:jest:

1badWS6
03-07-2012, 09:50 PM
Good zeke, then when you're done you can drive it over to show me and give me a hand with mine. You know, since you ducked and dodged me all last summer.

xpndbl3
03-08-2012, 05:20 PM
errrbody is ducking and dodging finishing their cars




me included!

xpndbl3
03-08-2012, 09:04 PM
ut oh this project is officially being put into high gear tonight by me speeding up this process.


BOOM!

litle88
03-08-2012, 09:06 PM
Umm Steve Booom is not appropriate right now sir!

How bout cachaaaw? Lol

litle88
03-10-2012, 05:05 PM
http://i214.photobucket.com/albums/cc127/litle8/d5411461.jpg

http://i214.photobucket.com/albums/cc127/litle8/ef8d71f6.jpg

http://i214.photobucket.com/albums/cc127/litle8/0a22dcf6.jpg

http://i214.photobucket.com/albums/cc127/litle8/9f4a5fb6.jpg


Duck n dodge thaaaat!!!! Lol

All by my Lil self biaches!!!

litle88
03-10-2012, 05:05 PM
Kmember bolted to body ONCE AGAIN!!!!!

Get'em ready!!!

litle88
03-11-2012, 03:09 PM
Front suspension is ready biaches!!!
http://i214.photobucket.com/albums/cc127/litle8/072b90ca.jpg

THEE PEWTER Z
03-11-2012, 10:53 PM
Nice . Cars take so much time when u actually learn that u wanna do it right . 3 hours spent making radiator brackets for me today. Lol

litle88
03-11-2012, 11:12 PM
Tell me about it!

I spent 2 hours just trying to get the lower ball joint nut on, I chased the threads like 50x's and it was perfect then I'd do the nut and it would get stuck at the threads right before the cotter pin holes and the whole shaft would turn. That was 2 hours + then I saw my boots on the upper bj were torn and since I still had the receipts to them and they were moog I got 2 new ones fuck it lifetime warranty lol

It was a time consuming day since 9:30 til like 5 then I had to get ready for work! But I know it's all done right you know?

THEE PEWTER Z
03-12-2012, 12:31 AM
Thats one thing bill taught me. I cant use his exact words lol but just dont "screw" do it right and in order so u can move on with a clear head. May have had our differences but he is a knowledgable dude

xpndbl3
03-12-2012, 01:35 PM
screw that bill guy! indian giver!!!



oh ya, get cracking zeke, i stayed up to 2am the first night knocking out rockers, then he doesn't even get them.....selling them on tech for the first $100 LOL

litle88
03-12-2012, 06:48 PM
Lmao why Steve? No more T/C?

Come on Bill!

02sleeperz28
03-12-2012, 08:08 PM
just passing through....

Jonas where the hell have you been?

xpndbl3
03-13-2012, 12:25 AM
no still got that, he's taking back other super secret squirrel stuff ;)

xpndbl3
03-16-2012, 10:48 AM
4 days later, guess I should update that zeke has the custom updated by xpndbl rockers, so now he's much closer to it running. :secret: Hurry hurry!

litle88
03-16-2012, 01:43 PM
3 hours later and I want to inform you that the d/s loop, Torque arm and driveshaft are IN!!!

After my badasses get out of school I'm going to put the pushrods ( measured by Xpndbl and his side kick Paul) and the rockers modded by Xpndbl. Then I will start putting the front drive accessories. There has been a set back though, I have a broken adjuster on my front Koni shock so it will need to get sent back! I might not do it til later maybe after the tune and break in.

So on to mocking the exhaust so I can get Paul to weld them cutouts in!

1_bad_TA
03-16-2012, 04:53 PM
Holy fucking race car

xpndbl3
03-16-2012, 08:41 PM
finish your list for today?

xpndbl3
03-22-2012, 03:05 PM
ah yes.....will this be done before april 1st? so you'll only be done one month late of the deadline!?!?!??!

Formula WS6
03-22-2012, 03:13 PM
:corn:

xpndbl3
04-08-2012, 09:03 PM
fail..............

litle88
04-08-2012, 09:10 PM
You failed me!!!

Car is done, just need the radiator and intake and it's on the ground.

twizted_creations
04-09-2012, 07:09 AM
You failed me!!!

Car is done, just need the radiator and intake and it's on the ground.

Then apparently it isnt done. Slacker!

xpndbl3
04-15-2012, 09:45 AM
soooooooooooooooooooooo

litle88
04-15-2012, 12:43 PM
http://i214.photobucket.com/albums/cc127/litle8/daceb5fa.jpg
http://i214.photobucket.com/albums/cc127/litle8/10d7e351.jpg

My shit is ready and the call has been made to Nick to pick up my junk! Lol
Now what?

98blueSScamaro
04-15-2012, 01:59 PM
Zeke its good to see her rolling again

litle88
04-15-2012, 03:29 PM
Thanks rob, now I need it running lol

xpndbl3
04-15-2012, 09:53 PM
excellent....what all is needed now to finish it up?


I pulled my axles out today to send them back to moser, that's about the highlight of working on my clunker lately.

litle88
04-15-2012, 09:58 PM
Mike to SD tune it and them putting my racetronix f/p and I'll be out and about on that biach!

Why u pulling the axels? You bent them at the track the last time when you went ?.??

litle88
04-21-2012, 01:33 PM
And even better news

http://i214.photobucket.com/albums/cc127/litle8/8abcea08.mp4

xpndbl3
04-21-2012, 09:43 PM
going big boy 5/8" studs on them.

02sleeperz28
04-22-2012, 03:08 AM
And even better news

http://i214.photobucket.com/albums/cc127/litle8/8abcea08.mp4

Pressure byatch!!!!!!!!!!

chrs1313
04-23-2012, 01:34 PM
going big boy 5/8" studs on them.

racecar shit there...:swing:

xpndbl3
04-23-2012, 05:38 PM
racecar shit there...:swing:

well since i'm trying to beat this chris kid i had to step up the studs in case i get radial tire shake :bang:

chrs1313
04-24-2012, 11:56 AM
Tire shake??? What's that...

litle88
04-24-2012, 08:15 PM
All these racecars in here! I wish I had one!

Ps Straightline will have my car Friday then they'll install the f/p and it's a date with Mike on the 2nd or 3rd.

xpndbl3
04-25-2012, 09:03 PM
suh-weeeeet

litle88
04-30-2012, 06:51 PM
FML!!

Paul took care of my abs delete wiring and the cutout wiring, he also did a good job on the exhaust and as we loaded it up on the uhaul trailer the inside lips on the floor of the trailer ripped my fuckin cutout motors and knocked the damn exhaust back about 2"!!!!! Then FAST didn't get my orings out in time!!! I tell you my luck has it when it's raining puzzys I get hit with cocks!!! Now my Mountaineer is puking coolant from either the wp or thermostat housing!!! FML

ryle
04-30-2012, 08:26 PM
Wow, Sounds like you are having a tough time getting this thing completed! I have been following for a while now and patiently waiting for results as I am sure you have. It seems like more often than not problems just keep popping up with builds like this. At least that was my experience. Just wanted to stop by and wish you luck. Hopefully this will be the last of your little set backs.

97ss497
04-30-2012, 08:27 PM
Sonava b; sorry about the bad streak of luck. Cars r def a pain in the ass sometimes, ok most of the time :-). You're gonna have a sweet car when its all said and done....

litle88
04-30-2012, 09:48 PM
Thanks fellas, well the car is at Straightline so it will be soon!

I know Nick n Mike will take care of it.

02sleeperz28
04-30-2012, 10:12 PM
I know Nike n Mike will take care of it.

Straightline is selling Nike's now? Wtf!?

litle88
04-30-2012, 10:13 PM
Damn iPhone autocorrect lol!

Nick@Straightline
05-01-2012, 07:59 AM
Zeke did you get the rest of your parts? Are they being shipped here or to you? Your car sucks to push hahaha!!

litle88
05-01-2012, 02:12 PM
I called FAST and they fedex'd them yesterday. The first time they sent it USPS inside a catalog so guess that didn't work! They were only able to ship them to me so as soon as I get them I'll shoot straight to you.

Sorry about the pushing, that damn spool!

98blueSScamaro
05-02-2012, 04:10 PM
push it real good!!!!!!

Nick@Straightline
05-03-2012, 09:27 PM
I called FAST and they fedex'd them yesterday. The first time they sent it USPS inside a catalog so guess that didn't work! They were only able to ship them to me so as soon as I get them I'll shoot straight to you.

Sorry about the pushing, that damn spool!

No problem. We all quit our gym memberships and take turns pushing your car in and out :lol:

chrs1313
05-04-2012, 11:44 PM
No problem. We all quit our gym memberships and take turns pushing your car in and out :lol:

Trying doing it up a uhaul trailer at 2am...I think that car has more push miles that drive in the last 2 years :burn:

litle88
05-05-2012, 12:21 AM
You week azz Irish!!! :jest:

Nick I finally got through FAST and them sob's barely sent my shit yesterday and has a tracking number scheduled for Tuesday! You figured after spending alsost a grand you'd get better customer care! So is the intake hose. That gets here on Monday. Sorry about all this madness. I also spoke to Dave at DMH and he's only going to charge me 80.00 for whatever I messed up. I can finally see a light at the end of my tunnel.

SpaZMaN
05-05-2012, 10:21 PM
well since i'm trying to beat this chris kid i had to step up the studs in case i get radial tire shake :bang:

Back off the hot wings you'll get less tire shake :jest:

litle88
05-05-2012, 10:45 PM
LMFAO!!!
Good idea, driver mod?

Formula WS6
05-06-2012, 01:31 PM
You week azz Irish!!! :jest:

Nick I finally got through FAST and them sob's barely sent my shit yesterday and has a tracking number scheduled for Tuesday! You figured after spending alsost a grand you'd get better customer care! So is the intake hose. That gets here on Monday. Sorry about all this madness. I also spoke to Dave at DMH and he's only going to charge me 80.00 for whatever I messed up. I can finally see a light at the end of my tunnel.

That's a deal to fix the cutouts

litle88
05-08-2012, 09:56 PM
Sooooo the orings FAST sent were the wrong ones!!!!!!!!!!!

I called SLOW and the will be shipping me a set that "should" work :eyes:

Bad news is that they won't get to Straightline til FUCKING FRIDAY!!!! FML

Does anyone know where to get orings locally?

98blueSScamaro
05-09-2012, 12:05 AM
What size Is the o rings. I have my car apart again and my 102 is sitting here. If the o rings I have will work I would be glad to help your brown ass out!!!!


Sooooo the orings FAST sent were the wrong ones!!!!!!!!!!!

I called SLOW and the will be shipping me a set that "should" work :eyes:

Bad news is that they won't get to Straightline til FUCKING FRIDAY!!!! FML

Does anyone know where to get orings locally?

litle88
05-09-2012, 05:18 AM
Rob if it's apart, take the orings with you to work and I may get my Lil brother to pick them up and take them to Straightline please. If its not the right size he can just bring them back. I would appreciate it my polish princess.

98blueSScamaro
05-09-2012, 02:16 PM
Rob if it's apart, take the orings with you to work and I may get my Lil brother to pick them up and take them to Straightline please. If its not the right size he can just bring them back. I would appreciate it my polish princess.

i will have them tomorrow sir at the work

litle88
05-09-2012, 10:40 PM
Zeke did you get the rest of your parts? Are they being shipped here or to you? Your car sucks to push hahaha!!

Nick the orings will be in tomorrow along with the intake tube.

97ss497
05-09-2012, 10:59 PM
I'll be there Monday afternoon for a tune; if your race car is still there I'll have to check that beast out! Hopefully yours is done so Mike doesnt move my tune to another day...

02sleeperz28
05-09-2012, 11:08 PM
^^Zeke must be VIP at Straightline. Us common people have to wait and hope to get the best pricing and service.

litle88
05-09-2012, 11:14 PM
Lmao!!
Hey I got seniority there do I might have to bump you LOL.

Ken, knock it off man your car was there the longest without paying rent! That disqualifies you as common folk lol

02sleeperz28
05-09-2012, 11:35 PM
^^lol!

1badWS6
05-10-2012, 09:13 AM
This thread makes my head hurt.

Double J
05-10-2012, 11:58 AM
Hope to hear some awesome numbers soon bro:burn: I had lots of delays too during my build. Keep me posted.

litle88
05-11-2012, 01:35 PM
On rt 30 to catch a glimps of the first start up.

twizted_creations
05-11-2012, 01:37 PM
About time zeke. Hope all goes well and they don't let the magic smoke out!

litle88
05-11-2012, 01:40 PM
Thanks Joe!

I don't smoke but right about now I need some magical smoke lol
Nervous as hell lol

Chris has been texting me talking smack lol

twizted_creations
05-11-2012, 01:41 PM
QMagic smoke is electriciaan talk for going poof!

litle88
05-11-2012, 04:39 PM
Well I just left Straightline and it's all good. I did get a roundhouse kick in the face and then a return to stance by chuckNick for 1) connecting the MAP sensor backwards and 2) for not tightening the coolant crossover hose in the rear!
After that she started right up with no fuss. Coolant burped right away and oil pressure was @60 I'm stoked and can't wait. I'll ice my face while you watch the video!

http://www.youtube.com/watch?v=_eSuI2raM68&feature=youtube_gdata_player

litle88
05-11-2012, 05:50 PM
My car killed Carroll Shelby at start up!
Sorry but I just hope they don't use the drew Peterson law against me since I was in Will Co.

litle88
05-11-2012, 08:15 PM
here it is
http://s214.photobucket.com/albums/cc127/litle8/?action=view&current=d6737db5.mp4

dont know what happened

97ss497
05-11-2012, 09:10 PM
Awesome! Sounds great man!

Glad it all worked out; now drive that beast!

litle88
05-11-2012, 11:36 PM
Lol I can't til ChuckNick decides to give Mike the green light for a tune, Goodluck on Monday and are you coming to the open house?

litle88
05-12-2012, 09:53 AM
Umm sorry, I just heard ChuckNick's video soundtrack in the background. Sorry guys but I was asking him for some popevil or trivium but he didn't want to lol

xpndbl3
05-12-2012, 11:17 AM
spots.....i'll need them!

litle88
05-12-2012, 11:56 AM
Yea ok

02sleeperz28
05-12-2012, 04:11 PM
here it is
http://s214.photobucket.com/albums/cc127/litle8/?action=view&current=d6737db5.mp4

dont know what happened

Sounds wicked! Looks like I am going to need that 10 and the hit for sure!

litle88
05-12-2012, 04:13 PM
Sounds and actually are two different things lol

We'll see lol

chrs1313
05-12-2012, 06:34 PM
What is the total length in days of this build?

:lurk: :kiss:

litle88
05-12-2012, 06:47 PM
Two fuckin years in 13 days!!!

97ss497
05-13-2012, 06:42 AM
I think both of our engines were being done at AES around the same time? I remember you answering alot of my questions about AES. I've got over 5k trouble free miles on mine already.... DOAH!

litle88
05-13-2012, 08:30 AM
They sure were!

And tune by mike too lol, I know it will be ok. I'm just hoping for 550 as a goal on straightlines Dyno of broken dreams lol what did u put down?

xpndbl3
05-13-2012, 10:44 AM
i got $5 that says no 550 zeke lol

litle88
05-13-2012, 10:54 AM
Lol daaaaaammn Steve bursting my bubble already? :jest:

litle88
05-13-2012, 12:55 PM
Lol here's some funny shit while we were trying to figure out why it wouldn't start, that's ChuckNick right before he gave me those kicks to the face, all I heard was jessssuuus!

[img]http://www.youtube.com/watch?v=e6QHJfO7w0M&feature=youtube_gdata_player[img]

xpndbl3
05-13-2012, 01:06 PM
my guess is 520.....just sayin

litle88
05-13-2012, 01:13 PM
Stop saying! Lol

97ss497
05-13-2012, 08:49 PM
They sure were!

And tune by mike too lol, I know it will be ok. I'm just hoping for 550 as a goal on straightlines Dyno of broken dreams lol what did u put down?

I put down 423/427 last tune. I replaced the 1 3/4 Hookers with 1 7/8's Kooks and the Magnaflow catback with an electric cutout and Corsa catback. I may lose some torque but hope to gain maybe 10 -15 hp?

Get my tune from Mike tomorrow afternoon...:burn:

litle88
05-13-2012, 08:52 PM
With that stroker I don't think you'll loose much of any in my opinion.

Tell ChuckNick I want to get on the rollers Wednesday night lol

Good luck tomorrow bud, I'll call up there see how you doing, or post up here on this thread it's cool too. Are you coming down for the open house?

litle88
05-13-2012, 08:53 PM
With that stroker I don't think you'll loose much of any in my opinion.

Tell ChuckNick I want to get on the rollers Wednesday night lol

Good luck tomorrow bud, I'll call up there see how you doing, or post up here on this thread it's cool too. Are you coming down for the open house?

litle88
05-13-2012, 08:55 PM
Wtf! Sorry for the double post.

97ss497
05-13-2012, 09:26 PM
I may have to sneak around your car while Mike's doing the tune and snare some of the race car parts off it LOL! You wouldn't notice the difference between my Ls6 manifold and your FAST would ya?!?

I'll def post my numbers tomorrow evening.

litle88
05-14-2012, 05:23 AM
Hey go for it I'm not stingy! I would say do it for your comparisons sake so you'd know what your missing lol, but good luck getting the rectangular ports to line up lol.
Ask mike if he still has his corsa? I might buy it off him.

Your car is gonna scream with that catback no cutout needed.

chrs1313
05-14-2012, 11:18 AM
my guess is 520.....just sayin

Old man agrees with this too...

I am hoping for more for you bud considering I did the intake... :)

litle88
05-14-2012, 06:46 PM
More bad luck, an oil leak developed. Looks like the oil pressure sensor I just hope it's not the rear seal or some shit like that! So I'll be working on my ride tomorrow at Straightline at 8am to fix it.

97ss497
05-14-2012, 09:30 PM
Their doing wheelies with your car in the parking lot Zeke!
http://i1108.photobucket.com/albums/h404/97ss497/IMAG0279.jpg

Sounds like you'll be up and running soon.

My day at the dyno wasn't as good as I planned, but for a good reason. It put down 15 less hp, but Mike only ran it up to 6100 rpm; whereas the last time he took it up to 6700. He noticed it was breathing better and getting more fuel than the previous dyno tune but the hp was leveling off at 6000 rpms. I have around 9k miles on my Patriot springs and he thinks they may be taking a set. I didn't realize they should be replaced around every 6k miles. So... time to buy a spring tool and get some new springs in the Hugger!

I thought it was cool that Mike was caring enough to not just go ahead and run it up to the higher rpms. He thought my springs were new when I did the 383 build but I did use the old springs and cam (only had 2k miles on em).

He was happy with the tune and so am I; the car runs great. Will have to see what it runs after I get the new springs in.

Good luck with your race car :burn:

litle88
05-14-2012, 10:48 PM
Lmao!!
Funny shit man!

Rob aka 98bluesscamaro has had really good luck with a set of PRC's on his vindicator cam for about 15k miles IIRC, But I like patriots too I had them and had no problems.

Changing springs is easy the tool is cheap
http://www.ws6project.com/user_stor/catalog/comp-cams-ls-engine-valve-spring-compressor-tool/
If you order from them before 1 you'll get it the next day lol they are fast and they use FedEx which deliver on Saturdays too.

litle88
05-15-2012, 01:41 PM
Dyno dday is tomorrow night at 5 so we'll see.

chrs1313
05-15-2012, 03:15 PM
Lmao!!
Funny shit man!

Rob aka 98bluesscamaro has had really good luck with a set of PRC's on his vindicator cam for about 15k miles IIRC, But I like patriots too I had them and had no problems.

Changing springs is easy the tool is cheap
http://www.ws6project.com/user_stor/catalog/comp-cams-ls-engine-valve-spring-compressor-tool/
If you order from them before 1 you'll get it the next day lol they are fast and they use FedEx which deliver on Saturdays too.

Haha you better check base again...lol

his piston met his valve...broken spring when we took those heads off...

pac springs is the way i would go...1521s here :cool:

oh and this signature of yours is nuts lol

litle88
05-15-2012, 03:58 PM
I gotta check his lies then, when he sold the cam and 243's from his old set up from Ron at Vengeance he said he had those PRC's for about 15k miles and all those passes. I remember cause he sold the heads and cam to my buddy Mario.

litle88
05-15-2012, 04:07 PM
I was at StraightLine all morning and I got the oil leak fixed, apparently my sensor didnt have a crush washer and it started leaking oil like the BP oil line in the gulf, I went to orielly's and they gave me a new one. Then it started leaking coolant from the hose that connects to the thermostat and I was like WTF! But Brandon the hippy guy at straightline went in Nick's drawer and got me a nice clamp. SO its all good for now? CHRIS,STEVE,ROB need not reply you frickin jinxs.

Anyways the DYNO D-Day is tomorrow at 4:30 see how it goes!

xpndbl3
05-15-2012, 08:13 PM
i'll be there sugar tits....you better have ICE COLD beer while i'm heckling you on the dyno....just sayin

litle88
05-15-2012, 08:55 PM
10-4 sugar bear!

97ss497
05-15-2012, 08:57 PM
I was at StraightLine all morning and I got the oil leak fixed, apparently my sensor didnt have a crush washer and it started leaking oil like the BP oil line in the gulf, I went to orielly's and they gave me a new one. Then it started leaking coolant from the hose that connects to the thermostat and I was like WTF! But Brandon the hippy guy at straightline went in Nick's drawer and got me a nice clamp. SO its all good for now? CHRIS,STEVE,ROB need not reply you frickin jinxs.

Anyways the DYNO D-Day is tomorrow at 4:30 see how it goes!

Brandon the hippy guy?? LMAO!

Hope it goes good for you tomorrow man!

litle88
05-15-2012, 09:48 PM
Lol that's what he reminds me off lol, he's a cool azz fella. But he looks like a cast member of Point break or something lol, or like that wiz kid with ADD from the Fast and Furious lol. Jk B! Nothing but love for ya bud.

I'll be bringing a few MGD's for Steve. If you heckle me Steve you will be getting a DUI!

xpndbl3
05-15-2012, 10:52 PM
no one will catch me in that 518rwhp black monster i'll be driving home ;)

chrs1313
05-16-2012, 11:15 AM
I'll be bringing a few MGD's for Steve. If you heckle me Steve you will be getting a DUI!

yeah dont drive home in Will county...they be hungry:judge:

wait till that ass puckers up for the first pull... ;)

And i thought rob threw all brand new springs on those 243 heads for Mario

Nick@Straightline
05-16-2012, 01:07 PM
Zeke no dyno today your car is still leaking.................jk

See you tonight

litle88
05-16-2012, 03:07 PM
Ohhhhhh that want even funny man my shit dropped to the floor!

xpndbl3
05-16-2012, 08:50 PM
sometimes cars can really teach us humility......sorry zeke

02sleeperz28
05-16-2012, 09:16 PM
sometimes cars can really teach us humility......sorry zeke

What happened?

97ss497
05-16-2012, 09:45 PM
Silence cant be good :-(

litle88
05-16-2012, 09:54 PM
http://i214.photobucket.com/albums/cc127/litle8/71bfdfce.jpg

Is all I wanna say right now!!

chrs1313
05-16-2012, 10:13 PM
Raining dicks!!!

98blueSScamaro
05-16-2012, 11:20 PM
No joke about the raining dicks. And zeke your boy got them heads with brand new springs I told him to get new springs before installed.

Formula WS6
05-17-2012, 08:01 AM
WTF. drive shaft too short? broken tail shaft/ output shaft?

98CamZ28
05-17-2012, 09:57 AM
I haven't been active in the thread, but I have been following waiting to see the results. Really sorry to see something like that happen after everything you've been through already. Good luck getting it back in shape.

I'm sure it's broken because the gobs of power that she is making :burn:

twizted_creations
05-17-2012, 10:12 AM
Its the Mexican super glue he used on the shaft seal.... JK Zeke, sorry to see that bud. It will all be worth it some day. Maybe. Soon?

Who knows. Not much else can go wrong now. :poke:

97ss497
05-17-2012, 11:27 AM
Everybody whos ever modded a car has days like this.

You'll be roasting Mustangs in no time man....

heymoej
05-17-2012, 01:29 PM
i also have been following this thread,i like the new tittle.cold beer,have one for me when you get it all sorted out........

like everybody else has said.........
you will be grinning ear to ear once you get to drive it & feel all that new found power.

good luck!

litle88
05-17-2012, 04:24 PM
Thanks fellas
Depressing is all I have to say, Nick I tried calling to let you know that I can't go there Friday night to take the Trans out. I forgot I have that NATO shit this weekend and I have no days off. I'll just take my frustration out on a damn protester or two cause their fags anyway ( you don't believe me just see one of their interviews with the media). Sorry Nick. When you get a chance call me. Maybe I'll just be able to help you get ready for your open house with whatever you need on Saturday of your going to the shop or Friday afternoon when I get off at 2. Let me know please.

litle88
05-18-2012, 10:20 AM
Well fellas here is what happens when using a Spohn, I contacted them and I told them what happened and I sent the pictures you see below and the you'll see their response. I ordered this d/s through the ws6store and as you can see I ordered the one that applies to me. Spohn's defense is you should of measured and that strapping a car on the dyno causes "stress" well no kidding, but more that being on a street? Really? Well then if I have to measure why would they sell their d/s's as stock lengths? And ready to ship? Or th400's or 4L60's or power glides ? If you still have to measure?! I also called PST abd strange this morning and they said they DO NOT make theirs shorter! They both said they make it to exact sizes. Now I'm out a Trans with no days off because of these NATO clowns and All cops have to be on the streets or close by! All I wanted was to have my car ready by memorial day weekend to celebrate it with my family!
What do you guys think?

From tech@spohn.net

The output shaft on your transmission broke, it's actually a very common occurence when strapped down to a chassis dyno. A chassis dyno places a lot of stress on the drivetrain.
The output shaft on your transmission broke, it's actually a very common occurence when strapped down to a chassis dyno. A chassis dyno places a lot of stress on the drivetrain.

It had nothing to do with your driveshaft. The driveshaft is exactly as it should be from your pictures. They are supposed to be a bit shorter than the factory driveshaft, you need a little more slip yoke travel for high performance applications. This is how we have built them for 13 years and how any performance driveshaft company builds them. With that said it is always the installer's responsibility when installing any driveshaft on any car to check for proper engagement, etc. before driving the vehicle.

It was just a matter of the stress the chassis dyno put on your transmission, it happens unfortunately.

It had nothing to do with your driveshaft. The driveshaft is exactly as it should be from your pictures. They are supposed to be a bit shorter than the factory driveshaft, you need a little more slip yoke travel for high performance applications. This is how we have built them for 13 years and how any performance driveshaft company builds them. With that said it is always the installer's responsibility when installing any driveshaft on any car to check for proper engagement, etc. before driving the vehicle.

It was just a matter of the stress the chassis dyno put on your transmission, it happens unfortunately.

Formula WS6
05-18-2012, 12:35 PM
sounds like they're just playing the blame game. LMK when you want a hand pulling the trans assuming Nick will allow you to keep the car there until it's done. My friend Pat can go through the trans and see what needs to be replaced.

litle88
05-18-2012, 12:39 PM
Funny thing is the car never got past 4k rpm!!! Mike was just sorting out the fuel tables. No hp pulls at ALL!!!

Yea if your available today let me know Paul please. I know it will take only a few. The bell housing can stay on

Formula WS6
05-18-2012, 12:53 PM
Dammit, I figured you were going to say that. thought you were playing babysitter to the wierdos downtown? I'm leaving tonight to take the kids to a water park and I won't be back til sunday.

litle88
05-18-2012, 02:09 PM
Lol figured you'd say that lol
It's cool

NHRAFORMULA00
05-18-2012, 08:57 PM
Zeke,sorry to hear about the damage. Trying to understand the whole thing here. You bought a drive shaft from WS6 store,it was a spohn, and the yoke was shorter than stock? Never heard of this before, unless it was custom ordered shorter than stock. Output shaft should not have broken on the dyno,even if the yoke was shorter. It is not under that much stress on the dyno because it is already spinning. The largest amount of stress is at launch off the starting line at the track.

litle88
05-18-2012, 09:44 PM
Me too this is how I ordered it....I don't understand it either. In the email they admitted that it is the right one! In the link you'll read "This driveshaft assembly is for 1982-2002 F-Body cars running the OEM transmission. If you are running an aftermarket rear, please indicate the rear u-joint type in the drop down option box below." and I specified 1350 ujoints for the 9"!
In the email they also admitted they make theirs shorter! Why?



http://www.ws6project.com/user_stor/catalog/82-02-spohn-perf-extreme-duty-driveshaft-stock-transmission/

1lejohn
05-19-2012, 09:46 AM
That suucks. Sorry to hear about ur bad luck. We had our share of problems on the dyno as well. Lost a vertor , tranny input shaft and flex plate when the vertor bolts backed out.

litle88
05-19-2012, 02:22 PM
Really? You too hu John?

Well I'm gonna wait til Nick has a day open and I'm gonna pull the Trans out and get an estate to see what's wrong with it.

98blueSScamaro
05-22-2012, 10:42 AM
i am sure its not pretty inside that thing. i am shocked that it didnt shack like crazy even at low speed. looks like the drive shaft never slipped into the bushing on the outer housing and wasjust held in place buy the out put shaft. and because there was no support the drive shaft just shook around till it broke the out put shaft and more. trans will need out put shaft tail housing and bearings and races for sure. It had to vib at low speed tho.

1lejohn
05-22-2012, 01:24 PM
Really? You too hu John?

Well I'm gonna wait til Nick has a day open and I'm gonna pull the Trans out and get an estate to see what's wrong with it.

Oh yea it was cool having the bolts fly around the shop. Not really. It has been all good for the most part since then. Just a couple minor hiccups. We lost another flex plate, a bell housing and a starter nose during a N20 pass. Not sure what happened.

It will be all good. We some 6.40's @ 107 last weekend. Won 3 grudge races.

litle88
05-22-2012, 04:27 PM
That's real nice John! Congrats

Now I'm gonna work my butt off next month to get my Trans done.

1badWS6
05-25-2012, 05:00 PM
Damn, and I thought I had bad luck. Hey look on the bright side, at least the engine runs lol. Call me if ya need anything ..

litle88
05-25-2012, 06:04 PM
Anthony your luck is better than mine sir.

But first I'd like to thank Nick n Mike n "BRANDON" fuggin hiiippp.....ok ok I won't call you that no more cause you'll jinx me!
But where else can you go to around here and you get greeted with a "welcome to straightline Zeke, while Brandon is removing your Trans we have char broiled burgers on the grill fresh to your liking". By this guy....

Lmao
http://i214.photobucket.com/albums/cc127/litle8/57c69085.jpg


I have my plans but here's the carnage!
Broken output shaft in fricken 2!

http://i214.photobucket.com/albums/cc127/litle8/c116fb63.jpg
http://i214.photobucket.com/albums/cc127/litle8/736e7f39.jpg
http://i214.photobucket.com/albums/cc127/litle8/d341178a.jpg

xpndbl3
05-27-2012, 09:11 PM
ouch....that doesn't look pretty at all inside.


Zeke how much money do you need to spend to get fed while at the shop? I must have not gotten my VIP free food pass yet LOL

litle88
05-27-2012, 09:34 PM
That's the beauty at Straightline sir! You don't need big $$$ to get VIP treatment cause everyone get it!

wrencher
05-29-2012, 07:09 AM
Wow that is an odd failure.
Never see them sheer the output shaft so cleanly.
Looks like it snapped it right on the snap ring groove for the vss tone ring/reluctor.
It looks like at least an main shaft, tailhousing, vss reluctor, & a rear mainshaft bearing.

When I had my driveshaft built by strange, they made me measure just to be sure.
That was a while ago though too like 04.

bwilde86
05-29-2012, 10:01 AM
Been stalking this thread to see the results. Sucks that stuff keeps going wrong for you. Guess I should be lucky that my driver mod doesn't warrant much power :/

Nick@Straightline
05-29-2012, 02:32 PM
Zeke glad we could help you out sucks about the trans for sure. Brandon said he doesn't have to jinx you anymore he says you just have bad luck. Even though your car was broke you still got to eat!!

1lejohn
06-08-2012, 07:47 AM
any up dates on the repairs?

SpaZMaN
06-08-2012, 04:03 PM
By the time this all this is done the boys at Straightline will be making steak dinners for Zeke.

xpndbl3
06-09-2012, 09:00 PM
lol....well hello stranger....long time no talk

SpaZMaN
06-09-2012, 10:15 PM
lol....well hello stranger....long time no talk

oh hi! :)

litle88
06-09-2012, 10:58 PM
By the time this all this is done the boys at Straightline will be making steak dinners for Zeke.

Hey I heard that!
Besides Nick asked me if I liked tube steak or nothing!

Guess what I said?!

xpndbl3
06-10-2012, 06:29 PM
only if he gives you all of it???


:secret:

THEE PEWTER Z
06-10-2012, 09:54 PM
sheesh . been there zeke sorry to c for sure

litle88
06-13-2012, 09:57 AM
Thanks Pauly!

NICK come get my turd please.

She's almost ready for round deuce!! Let's see wtf happens now, Steve you can't come over and see but if you do let me know what your wearing please. Cause I'd hate for us to wear the same shirt again lmao!

litle88
06-13-2012, 09:58 AM
Trans is being viperized as we speak, I'll be going with a Strange D/s this time!!

Spohn!! Kizz my azz!!

xpndbl3
06-13-2012, 09:23 PM
haha we look like twins.......good thing i'm the better looking one ;)

next time i'll just wear some hunting gear, that way I know we won't match lol

chrs1313
06-14-2012, 01:26 PM
:lurk: :)

litle88
06-20-2012, 03:16 PM
Wow is Spohn in a difficult time right now? I can't believe the customer service over there!

I got a call from Mike at the Ws6 store this morning to inform me that they were NOT going to refund me the money for the D/s. The owner (Mr Spohn) said because I grenaded the d/s and was run over by something! I asked the Tech that I wanted to hear those words from his (the owner of the company) own mouth, I told the tech I'd wait as long as I had to. He never did, after a few minutes waiting. His "tech" was studdering for words and couldn't even give me NO straight answers. I knew they were going to pull a stunt like this and I took pictures and video of it as i was packing it back in its original box. I asked them this morning to send me pictures of the d/s so I can see them and they still haven't sent them after reminding them!

Unreal! I can't believe a company this size would try to get over on a blue collar working American over a driveshaft that was in perfect condition! Lol all it did was take out my Trans under deacceleration, this can be asked to anyone at Straightline UNREAL!!

litle88
06-20-2012, 03:19 PM
And then they try to throw the Ws6 store under the bus saying I also needed a code issued to me for returning it after I called Spohn my self to ask for the proper protocol to return an item. And they said to just ship it to them and they would credit the ws6 store since I got it through them! Just a Shame!

heymoej
06-20-2012, 03:25 PM
sorry to hear all the bullshyt they are putting you through.........

as if fudging up your tranny was not enough to go through.

i will remember there name............. for all the wrong reasons.

good luck!

SchultzLT1
06-28-2012, 08:05 PM
I feel like a long lost vet. I've been around so long, I remember when Zeke's car used to run.

litle88
06-28-2012, 08:11 PM
Funny frickin guy! I remember you use to hang out with us then you got engaged and have been for the last 4 years lmao! You married yet? Did she make u sell the tbss 3SS? Lol

I'll have you AND TECH know that I WILL BE DRIVING MY CAR THIS WEEKEND! Mike put a basic tune and I need to put 200 very easy miles on the Trans and motor then have Mike get me some good numbers! NOW WHAT BITCHES lol

Formula WS6
06-29-2012, 07:37 AM
that's awesome to here Zeke......now bring my tools back lol

SchultzLT1
06-29-2012, 04:01 PM
Awwww naw, that's not what happened. We broke up in May of last year. I moved up to the north side for 9 months but now I'm back in EP on the SOUF SIDE. No cool cars this year :eyes:, so I'm just going to need a ride from you super cool dudes, plus then I can :chug:

litle88
06-29-2012, 04:28 PM
LMAO!! Don't start crying on my ass either lol! Like I always say if a woman is making you give up your ride, give it to her one more really good time then get rid of the biach QUICK!

Come on brotha get you another fbody!

Welcome back to the souf side!

Ps I hope she didn't sink her claws in you than deep that your a Scrubs fan now did she?

SchultzLT1
06-29-2012, 04:55 PM
Now your just foolin' yourself! I am getting something, but not for another 18 months or so. I'm going to wait until I top out in the union before I go spending all the money I have. F-bodies are out bro.

litle88
06-29-2012, 05:00 PM
Lmao! Sounds good bud!

But your still a Sox fan right? Lol

I miss you! I'll be in the gayrage if your not doing it anything lol

SchultzLT1
06-29-2012, 07:01 PM
Sox fan fo sho! I don't know who the hell likes the cubbies besides the gay's. I think Steve is a cubs fan.

Can't make it tonight, too much happy hour.

xpndbl3
07-04-2012, 02:16 PM
go sox! and zeke gave me and polish bull MOAR free beers and some excellent messican food. and we saw the whitest messican ever....i mean russian. lol huh zeke

litle88
07-05-2012, 10:40 AM
Yes GO SOX!

Ok biaches, just called Goodol Nick and confirmed my tune date for round 2 of shit to go wrong! It's going to be on...................

SchultzLT1
07-05-2012, 04:43 PM
Let's hear those numbers when it's done.

litle88
07-05-2012, 06:36 PM
Going on next Friday at 9am!

SchultzLT1
07-05-2012, 10:42 PM
What are we doing this weekend?

litle88
07-05-2012, 11:36 PM
I'm going to the Morris carshow bud. You in?

SchultzLT1
07-06-2012, 12:20 AM
PM me some info.

xpndbl3
07-06-2012, 11:38 AM
so what time should i show up at the dyno zeke? and don't wear the same shirt as me this time.....

1badWS6
07-10-2012, 10:48 PM
Did it blow up again?!

litle88
07-12-2012, 11:34 PM
Shut up Anthony!!
That shiat wasn't funny! Now I'm nervous azz shit! Lmao I'll be at Straightline at 9am!

xpndbl3
07-13-2012, 09:37 AM
well.....updates!

97ss497
07-13-2012, 11:59 AM
waiting for some good news!

litle88
07-13-2012, 12:20 PM
515 hp
490 tq

Final numbers on a hot azz day!!

xpndbl3
07-13-2012, 12:33 PM
congrats sir....been quite the long road for you

02sleeperz28
07-13-2012, 01:30 PM
Congrats. Any video? Btw, the new title of this thread is hilarious!

litle88
07-13-2012, 03:03 PM
Lmao!!
I'm waiting on the video to get finalized on YouTube.

But I would like to thank a Woman and a few guys if I may.

Id like to thank my Wife first of all for putting up with me and not being able to stop me while I spent all this money lol. She contributed a lot to this project and I appreciate it a lot.

Next there's quite a few of you guys out here that have helped me out tremendously! In no particular order here you go!

* Nick @ Straightline thanks for being there for me all those times, couldn't of finished this without you man. You and your crew have always been there for me and I will never forget it!
* Mike @ Straightline your tunes are always bad azz man, thanks a lot.
* Brandon @ Straightline thanks for having those little hands and getting to those hard to reach places for me, and good luck in finding a minion of your very own. Lol
* Chris bud what can I say you have helped me out ALOT and you did an awesome job on the FAST and the rearend and of course the tranny!
* Paul, man bud I know I can be a pain in the dick but man thanks for hooking up the exhaust the cutouts (and the loaner lol), the abs delete kit and more importantly the pushrod! Lol
* Steve thanks for not showing up so nothing broke! Thanks for that assist on the P/r's and of course for answering all those questions all the time. OH AND DID I MENTION I APPRECIATE YOU NOT SHOWING UP?!
* Bill thanks for all the advise as usual it paid off.
* Rob! My polish princes! Thanks for all that advise and help bud, and answering all my questions.

Well I'm happy and I appreciate the help you guys have rendered to me I won't forget it! Even though it was Friday the 13th lol

xpndbl3
07-13-2012, 03:08 PM
geez that post is almost as bad as the strip club i worked at where all the women kept throwing me money to "put it back on" whew

litle88
07-13-2012, 03:45 PM
Here you go

http://i214.photobucket.com/albums/cc127/litle8/0e963daf.mp4

[img]http://www.youtube.com/watch?v=-klKRjOfRTE&feature=youtube_gdata_player[img]

ONEBADWS6
07-13-2012, 04:15 PM
Congrats sir!!

NHRAFORMULA00
07-13-2012, 04:21 PM
Very nice # Zeke for a Mustang Dyno!!!! Glad to see you finaly got it straightened out. On friday the 13th. :huh:

litle88
07-13-2012, 05:38 PM
Thanks Bill

Thankyou Mr. Johnson. I'm happy as hell

98blueSScamaro
07-13-2012, 06:38 PM
she sounds sooooooo nasty........

97ss497
07-13-2012, 06:48 PM
It was worth the wait man! Sounds wicked! Off to the track!

chrs1313
07-13-2012, 07:58 PM
Congrats bud, glad I could help, now enjoy that bad bitch :)

SchultzLT1
07-13-2012, 08:38 PM
Woah Zeke that's awesome! I know you love that black beauty! Congrats bro, now lemme get a ride!!!

litle88
07-13-2012, 09:30 PM
No rides!
And I'm going to rsd the 20th so we can hook up!
It's definitely worth it.

Also I'd like to thank Pat aka Wrencher for the Trans!

1badSS
07-14-2012, 10:05 AM
Congrats man! I've been following this thread for a while, glad it all worked out.:cheers:

xpndbl3
07-15-2012, 10:27 PM
rsd you say......

THEE PEWTER Z
07-15-2012, 11:56 PM
Glad to c you finally got it finished Zeke. sounds sick

litle88
07-16-2012, 12:04 AM
Jezzzzz sir!!
You in?

litle88
07-16-2012, 01:16 AM
Glad to c you finally got it finished Zeke. sounds sick

Thanks Pauly!

xpndbl3
07-16-2012, 02:33 PM
am i in for what? also zeke......cordova rental in no time!

litle88
07-16-2012, 07:57 PM
In for RSD sir!

Cordova hu?

xpndbl3
07-16-2012, 08:11 PM
cordova thread is posted, doubt i'll be able to get any time off work before then to finish up my car for it :( Maybe I'll see if the mustang i built for a guy wants to race that night.

brandon@straightline
07-17-2012, 12:13 AM
Lmao!!
I'm waiting on the video to get finalized on YouTube.

But I would like to thank a Woman and a few guys if I may.

Id like to thank my Wife first of all for putting up with me and not being able to stop me while I spent all this money lol. She contributed a lot to this project and I appreciate it a lot.

Next there's quite a few of you guys out here that have helped me out tremendously! In no particular order here you go!

* Nick @ Straightline thanks for being there for me all those times, couldn't of finished this without you man. You and your crew have always been there for me and I will never forget it!
* Mike @ Straightline your tunes are always bad azz man, thanks a lot.
* Brandon @ Straightline thanks for having those little hands and getting to those hard to reach places for me, and good luck in finding a minion of your very own. Lol
* Chris bud what can I say you have helped me out ALOT and you did an awesome job on the FAST and the rearend and of course the tranny!
* Paul, man bud I know I can be a pain in the dick but man thanks for hooking up the exhaust the cutouts (and the loaner lol), the abs delete kit and more importantly the pushrod! Lol
* Steve thanks for not showing up so nothing broke! Thanks for that assist on the P/r's and of course for answering all those questions all the time. OH AND DID I MENTION I APPRECIATE YOU NOT SHOWING UP?!
* Bill thanks for all the advise as usual it paid off.
* Rob! My polish princes! Thanks for all that advise and help bud, and answering all my questions.

Well I'm happy and I appreciate the help you guys have rendered to me I won't forget it! Even though it was Friday the 13th lol

Congrats on the new found power! Shoot me a message when you're ready to get beat by an import again :drive:

litle88
07-17-2012, 10:14 PM
No need to pm sir, I'll be at rsd Friday! Can you make it?

.......cricket ......cricket.....cricket......

Umm no I see, oh and bring a leash for that crank LMAO!!

chrs1313
07-17-2012, 10:52 PM
I will be there with a lane next to me for that big block :kiss:

litle88
07-18-2012, 05:30 AM
I will be there with a lane next to me for that big block :kiss:

Ohhhhhhh the nerve!!!!!:secret2:

xpndbl3
07-18-2012, 08:20 AM
i love changing thread titles

98blueSScamaro
07-18-2012, 12:51 PM
I will be Bench racing and zeke has more work to do. Time to see a real tire on that car

brandon@straightline
07-19-2012, 12:25 PM
No need to pm sir, I'll be at rsd Friday! Can you make it?

.......cricket ......cricket.....cricket......

Umm no I see, oh and bring a leash for that crank LMAO!!

Soon enough my friend, won't need a leash either, I used self tapping screws and super glue this time, crank ain't goin anywhere!

Should I ask Nick if I can borrow the big dust pan from the shop to clean up your mess of parts at RSD?

97ss497
07-22-2012, 09:25 PM
Your car sounded so bad ass nobody wanted to race you man! :secret2:
http://i1108.photobucket.com/albums/h404/97ss497/IMAG0315.jpg

Once you get some real drag radials and go to a better prepped track you'll have a lot better success.

Nice to meet you and hope to hook up @ Byron soon...

Sorry for the shitty cell phone pic.