Starting Problems
02-29-2012, 06:35 AM
#1
Teching In
Thread Starter
Join Date: Feb 2012
Location: Abu Dhabi, UAE
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Starting Problems Hi All,
Just picked up a cheap 02 Z28 Vert. It has a few jobs to do on it but one of the main ones is when i go to start it.
On the first turn of the key, the engine just cranks and shows no sign of starting.
Second turn of the key, it fires immediately and then runs fine.
As it fires immediately second time round, I am at a loss to explain why it takes 2 attempts.
Any ideas?
Cheers
Just picked up a cheap 02 Z28 Vert. It has a few jobs to do on it but one of the main ones is when i go to start it.
On the first turn of the key, the engine just cranks and shows no sign of starting.
Second turn of the key, it fires immediately and then runs fine.
As it fires immediately second time round, I am at a loss to explain why it takes 2 attempts.
Any ideas?
Cheers
08-30-2012, 06:59 PM
#2
Staging Lane
Join Date: Jul 2005
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Having the same problem for a while (years). Even if I crank for 1 second or 5+ on the first try, it always starts right up on the second crank. I've tried turning the key to on, back off, then on again a couple times before initial cranking and it doesn't make a difference. Runs fine once it does start.
