chriswildermuth

I ws coming back from a car meet and was passed by 2 bikes, one was a haybussa and the other I believe to be a newer gsxr 600. I slowly catch up to them and then the 600 takes off. I manage to match his wot. I pull ever so slightly, and shut down with maybe a car on him. I think to myself maybe ie will try again. Thinking he might have been a gear up. Sure enough, we pass some traffic and line up again from about 65. This time I get an ever so slight hit and very slowly pull on him again. I shut down near mid 4th with him near my rear bumper. Too bad the bussa didn't want any, I would have loved to see that thing go.

Now I just need to run some stock ls1 cars, so they can put me in my place

sweetC5

O boy, sounds like the gto is running strong! Good kill

Urban Legend

iTrader: (5)

Rider was weak but winning is winning. And you won.

BOBS99SS

iTrader: (2)

if your going to post about pulling bikes we need some mod info

Irunelevens

This. If it's not at least H/C or a 150 shot, that bike was up two or three gears.

hendrixx

^ ever so slightly do we need a slight mod list.... just a slight one

Irunelevens

Now it does say "11 second club" under his name, but we don't know if that's the GTO or not.

chriswildermuth

Car is tuned

audacious nick

If you have a tune-only GTO, you didn't beat the bike.

itsslow98

iTrader: (18)

Worst thread ever, it was probably the new Kawasaki 250.

chriswildermuth

The rider was no light weight, maybe 250lbs.

LS1rob00

iTrader: (9)

Lol...

Mach Boy

And had the Flintstones mod.

snake95

See sig...

chriswildermuth

lol you guys.

full mods are:

SS OTRCAI
sjm line-lock
Fast 102
TNT kit
LS7s cam
ARP Head bolts
Callies Compstar crankshaft
Callies h-beam connecting rods
Wiseco forged pistons -10cc dish
Clevite H main bearing set
Clevite rod bearings
Cometic head gaskets
SLP 25% UDP
Monster stage 3 clutch
PRC .675 duel springs
TSP 7.40 pushrods
GMM Race shifter
PS 1 3/4 LT headers
Spintech mufflers
x-pipe
402ci
ngk wideband
Cat delete
26x11.5x15 hoosier QTP slicks
weld prostars in the front and rear(15x3.5 15x10)
Air lift drag bags
Walbro 255LPH fuel pump

94LT1TA6spd

Im sticking to the point I made like 3 weeks ago....

BS kill stories always from dudes with like 15 or less posts... always written the exact same way...

****sigh****

Coincidence?? I doubt it.

94LT1TA6spd

Oh, and in this guys defense, he does have 19 posts...

chriswildermuth

no bs car makes 700+ rwhp on spray, and high 400s on motor

c-ham

just to clear things up, i have an 06 ninja zx6r, which i have not ran, howerver, my buddy, with same mods, has been 10.55@131 on his, he is 170lbs, mods are pipe, powercommander, -1 front sprocket, lowered and strapped, thats on stock street tire stock shifter stock clutch , stock wheelbase. my 03 gsxr 600 went 7.36 at 101.7 in 1/8th with just a slip on muffler, and -1 sprocket with my brother riding it, i went 7.38 at 98 and it was lowered in rear only because the strap broke which actually make it wheelie worse. so this is a highly unlikely kill story because all these passes mentioned above are on 1.8 60ft,s at a roll these 600's will murder most of our cars.

chriswildermuth

I run low 7s at 97, pb is 7.3xx from a high roll it takes away most of the advantage for a 600. I also have a 07 zx6r, and I am assuming your 06 is a 636.

http://www.streetfire.net/video/need...al_2367932.htm

car making passes on N20