Drag Racing Tech - sonoco extended lifting at top end
03-05-2012, 09:16 PM
my extended sonoco vfn hood lifts in the middle on the top end, the hood goes right up against the windshield, does anyone else have this problem.
03-06-2012, 12:28 PM
It's not an uncommon problem, the base of teh hood where it meets the windshied is a low pressure area and the air going thru the engine bay at speed, wants to get out as well.
Alot of people put a dzus in the center of the hood just for this reason. A small area for an air relief would also help let the air out of the engine bay some as well.
03-06-2012, 01:52 PM
Hows the rest of the front end of your car, how low is it? You running the air dam, or wheel wheel liners? I noticed after taking mine out alot more air under the hood over 60 it would start to flap, I put the wheel wells back in, alot of that went away
03-07-2012, 01:46 AM
I gaze at the hood every time during a run and at 130 it's really bad.
03-08-2012, 11:10 AM
i have the liners in and the air dam
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO