View Full Version : Champion motors lsx 454 dyno 647 rwhp na


Rob@ChampionMotors
03-07-2012, 05:51 PM
01 Z06 4L60E trans
LSX 454 11.5 to 1 short block
NOS cam but haven't install NOS kit yet.:D
All Pro LS7 heads
All Pro intake
Accfab TB
:canadaflag:

Rob@ChampionMotors
03-07-2012, 08:59 PM
http://www.youtube.com/watch?v=G3AvaiwyXDA&list=UUK6rgc5EDKK_Sw5tJlAjaVw&index=1&feature=plcp

We were rolling into the throttle so tranny wouldn't downshift, WOT above 4000rpm.

sugey
03-10-2012, 10:04 AM
Very nice !!

Rob@ChampionMotors
03-10-2012, 10:31 PM
Very nice !!

Thanks, looking to improve 2.50" exhaust to a 3.0".
Rob.

Rob@ChampionMotors
04-01-2012, 10:39 PM
Dyno less than 1hp loss over no filter with hood open vs K&N and hood closed.:cheers:

bluedevil500
04-02-2012, 02:02 PM
Dyno less than 1hp loss over no filter with hood open vs K&N and hood closed.:cheers:

Interesting. That's a pretty efficient intake.

Rob@ChampionMotors
04-03-2012, 08:23 PM
Next dyno disconnect rear 2 1/2" GHL exhaust to see if it is a restriction.:cheers:

V-seriesTech
04-08-2012, 06:49 PM
Thats badass NA. Well done. Sure it's gonna be nasty at the strip.

Rob@ChampionMotors
04-10-2012, 09:09 PM
Thats badass NA. Well done. Sure it's gonna be nasty at the strip.

Strip this weekend.:D

V-seriesTech
04-12-2012, 09:36 PM
Strip this weekend.:D

lucky bastards.

Do it up.

sugey
04-12-2012, 11:17 PM
What did it run ?

V-seriesTech
04-13-2012, 08:40 PM
What did it run ?

Only Friday hommie,...even in Canada.

:D

V-seriesTech
04-16-2012, 08:18 PM
So whats the good word fella's? How'd it go?

ryeguy2006a
04-18-2012, 01:35 PM
That is a pretty serious N/A motor!! Nice work.

Rob@ChampionMotors
04-22-2012, 11:17 AM
So whats the good word fella's? How'd it go?

Track prep isn't there yet. Hope this coming weekend.:(

V-seriesTech
04-23-2012, 11:20 AM
Track prep isn't there yet. Hope this coming weekend.:(


Understandable. Take your time. When its right its right