Eastern Members - Plz help!!! Rear end...

my diff got messed up somehow by the person who owned the car before me:bomb::ripped: its a 98 v6 A4 and the diff got worse so im trying to find a rear end to replace it and called alot of local shops and cant seem to find any:bang: let me know if you have one for sale or know where i can pick one up at im looking for 98-02 rear and i dont have traction control but i might as well upgrade so let me know the gearing
THANK YOU if u can help me!:

LS1LT1 is very good with rearends. He 'fixes' mine about 3x a week. Fireturd is decent too, but not quite as good.

Lots of yards in Harrisburg area with Fbodies. Most are pick and pulls.

Im thinking of selling my 373 rear 4 channel 10 bolt. It needs a wheel bearing from the sound of it. I was driving on it as of last week. If you want it Ill sell it for $200. And I know a local guy for $120 he'll install a complete bearing and seal kit. Kit will cost about $120-140 depending where you buy. The rear and installer are in south jersey near delaware memorial bridge.

So for $450 you can have a fresh 373 rear.

Lots of yards in Harrisburg area with Fbodies. Most are pick and pulls.

I called four earlier and no luck :bang:

Im thinking of selling my 373 rear 4 channel 10 bolt. It needs a wheel bearing from the sound of it. I was driving on it as of last week. If you want it Ill sell it for $200. And I know a local guy for $120 he'll install a complete bearing and seal kit. Kit will cost about $120-140 depending where you buy. The rear and installer are in south jersey near delaware memorial bridge.

So for $450 you can have a fresh 373 rear.

If I gave him my rear with a new diff would he install that plus all other bearings and seals ect.? For close to that price?
Thanks

I have a 3 channel 10bolt 3.73 if ya want it 200 at 19504

I have a 3 channel 10bolt 3.73 if ya want it 200 at 19504

How many mi are on it? And does it have traction control bc my car doesn't? Ha
Thanks Cody
Hope it's none tc so I can pick it up ha

3 channel is no traction control:). Lots of miles on it but it was fine when I took it out.

I got it from a junkyard when my stock rear crapped. Even had 3.73s from the junkyard in it lol.

Oh has th ebrake stuff even the sensor still in it. Hell if ya need rotors I have to stockers for it lol

Oh has th ebrake stuff even the sensor still in it. Hell if ya need rotors I have to stockers for it lol

Ok sweet thanks :D I'll get back to you soon after I see what my next pay check is ha

If I gave him my rear with a new diff would he install that plus all other bearings and seals ect.? For close to that price?
Thanks

Yeah he would probly do it but my cost was with the rear out of the car. If you do the same he should be around the same price.

Any 3 channels?...

Bump...

There are 3 or 4 of these sitting in my local U-pull yard just outside of Taneytown. They'll pull them for you for and drop it in your truck for $500, or you can spend 30 minutes and DIY for hundreds less.

There are 3 or 4 of these sitting in my local U-pull yard just outside of Taneytown. They'll pull them for you for and drop it in your truck for $500, or you can spend 30 minutes and DIY for hundreds less.

What is the name of the yard do you have a link? Phone number or anything to get ahold of them? Thanks!!

Im in the same boat as you are. Thinking my carrier bearings are shot, but I dont know until I open it up and have a look. It would be nice to find a place that has newer Fbody parts in stock around Harrisburg and doesnt want your first born for pieces.

Im in the same boat as you are. Thinking my carrier bearings are shot, but I dont know until I open it up and have a look. It would be nice to find a place that has newer Fbody parts in stock around Harrisburg and doesnt want your first born for pieces.

yea i know what you mean i cant believe what they ask sometimes but are you looking for non T/C as well? if not i found a couple of places that have traction control but want like 350 thats the best so far... :(

Hey proj I didnt forget about you. The deal on that 9" fell through but if something comes up I'll let you know.

Hey proj I didnt forget about you. The deal on that 9" fell through but if something comes up I'll let you know.

Ok thanks.... And quick question might be a dumb one but I found a rear end but the guy doesn't know what it came out of trans am or Camaro and he doesn't know the ratio he said if I could find out for him he'd give me a deal if I wanted it but it HAS traction control so I don't want it but I was jw how do you tell don't you count the teeth on the larger gear? But how would you tell if it's 2.42 or 3.42? And how would I tell if it's 3.08? Thanks if you can't help ha :cheers:

What is the name of the yard do you have a link? Phone number or anything to get ahold of them? Thanks!!

Chaz's Auto Parts. NW of Taneytown, MD. Near the PA border, right off Rt 15. They have their online prices, but the U-pull prices are a fraction of the cost. Minimal selection, but the cars are all up on blocks, well spaced, and they have a gravel (not mud!) yard :) I was there 2-3 weeks ago and they had several 98+ cars.

Chaz's Auto Parts. NW of Taneytown, MD. Near the PA border, right off Rt 15. They have their online prices, but the U-pull prices are a fraction of the cost. Minimal selection, but the cars are all up on blocks, well spaced, and they have a gravel (not mud!) yard :) I was there 2-3 weeks ago and they had several 98+ cars.

Thanks I'll check them out

Bump.