View Full Version : Procharger D1, BMR Suspension and more Build...


Thebeast916
03-18-2012, 12:20 AM
Procharger shipped Friday, but crank pulley is on back order. So whenever the pulley ships I can start install.

I will be installing the d1 with upgraded 3core Intercooler, ls9 injectors, ngk tr6 spark plugs, and kenn bell boost a pump.

Also having Lashway Motorsports install all my bmr suspension on tuesday including trailing arms, sway bars, toe rods and bushings.

To monitor my engine, I have installed a center stack triple gauge pod with dual aeroforce gauges and a Wideband.
Pics coming

Thebeast916
03-18-2012, 12:20 AM
http://i302.photobucket.com/albums/nn109/thebeast916_2008/2012-03-13134048.jpg

Blackbird-WS6
03-18-2012, 12:22 AM
sounds badass

Thebeast916
03-18-2012, 12:24 AM
I can't wait to start install. Going to dyno it at lashway when I am ready

Blackbird-WS6
03-18-2012, 12:26 AM
would love a g8 setup like this for a DD

what are your power goals?

hopefully i get on the dyno before yours does lol

Thebeast916
03-18-2012, 09:05 AM
Anywhere near 550rwhp

Camaroking1996
03-18-2012, 06:12 PM
What kind of gauges are those?

Blackbird-WS6
03-18-2012, 06:44 PM
What kind of gauges are those?

dual aeroforce gauges on the ends and AEM wideband in the middle

Thebeast916
03-18-2012, 07:35 PM
dual aeroforce gauges on the ends and AEM wideband in the middle

That's it.

Erik@Lashway
03-18-2012, 09:41 PM
Pimpin man, looking forward to another badass build.

Thebeast916
03-18-2012, 10:38 PM
yes sir. probably install procharger sunday next week or the tuesday after that. not sure yet

sully28
03-19-2012, 10:19 AM
This is gonna be sick Brain.

Thebeast916
03-19-2012, 06:16 PM
Yes it is. Just checked my tracking info. Procharger will be delivered tomorrow. But still need that damn crank pulley.

See you at lashway tomorrow sully

LitiGATOR
03-19-2012, 06:34 PM
Very nice, I'm dropping my car off Wednesday for a wideband install.

Thebeast916
03-19-2012, 07:06 PM
Very nice, I'm dropping my car off Wednesday for a wideband install.

Where u taking it?

LitiGATOR
03-19-2012, 07:32 PM
Lashway

Thebeast916
03-19-2012, 07:33 PM
Nice choice.

LitiGATOR
03-19-2012, 07:41 PM
All I have to go by so far is a couple phone calls, and I'm already impressed.

Thebeast916
03-19-2012, 08:02 PM
Very good. I've been talking with them for over a year. They also sponsor our car show at brus room every month

Erik@Lashway
03-19-2012, 09:30 PM
hey guys - thanks a lot for the shout outs!

Erik@Lashway

Erik@Lashway
03-21-2012, 12:48 AM
Check it out!!!

http://www.facebook.com/media/set/?set=a.414668868548595.117120.163787460303405&type=1

THE INSTALL!

Thebeast916
03-21-2012, 10:17 PM
Nice. Car handles awesome. Thanks Erik and josh.
And look what has arrived
http://i302.photobucket.com/albums/nn109/thebeast916_2008/2012-03-20165337.jpg
Started getting everything organized today and getting stuff preassembled.
http://i302.photobucket.com/albums/nn109/thebeast916_2008/2012-03-21190232.jpg

Thebeast916
03-23-2012, 12:17 AM
Pulley will now be delayed till next week. This sucks

Thebeast916
03-26-2012, 01:03 AM
Suspension was installed by lashway last week. Can't say enough about Erik, josh and the shop.

As for my procharger, my pulley will hopefully be in this week. I'll be starting install this week pending pulley

Erik@Lashway
03-26-2012, 10:35 AM
Thanks Bryan, we appreciate it.

Thebeast916
03-29-2012, 01:26 AM
Crank pulley will finally be here tomorrow or Friday. It's being overnighted from procharger. Starting install sat. Finishing Sunday. Stay tuned.....

Thebeast916
03-31-2012, 01:48 AM
Here is where I am now. 5.5 hrs and almost done. Another hr or so
http://i302.photobucket.com/albums/nn109/thebeast916_2008/2012-03-30132139.jpg.
Car will be done Saturday and I will be at lashways car show at the festival flea market on Sunday...

LitiGATOR
03-31-2012, 05:07 PM
Good stuff Brian

Erik@Lashway
03-31-2012, 06:17 PM
Looks sick man

Thebeast916
04-01-2012, 12:51 AM
car is all finished. still not tuned. that will happen tuesday as well as bap and injectors. its definately loud and will take some getting used too.

ill be at the car show in the am at the festival if anyone wants to meet up. hanging in the lashway booth.

Thebeast916
04-03-2012, 01:08 AM
Injectors are in and car is running strong. Only took it to 4200rpms and it's just insane.
Dyno and tuning will take place Tuesday. Stay tuned.....

Thebeast916
04-03-2012, 01:09 AM
http://i302.photobucket.com/albums/nn109/thebeast916_2008/2012-04-01134800.jpg

Blackbird-WS6
04-03-2012, 01:15 AM
Injectors are in and car is running strong. Only took it to 4200rpms and it's just insane.
Dyno and tuning will take place Tuesday. Stay tuned.....

let me know how the Dyno feels LOL

good luck bro, 800RWHP...... give or take that is :devil:

:cheers:

Thebeast916
04-03-2012, 08:17 AM
I want over 500. I'll be happy wherever it lands past that.

Erik@Lashway
04-03-2012, 08:53 AM
470-490 rwhp....that is my guess.

Erik

Thebeast916
04-03-2012, 10:45 PM
Definitely over 500rwhp. Dyno was blocked by the challenger today. So dyno has been moved to Friday.

We tuned the car for 6+hrs today and almost have it running like it should. We will finalize it on the dyno, but everything looks good thus far.

Will update as we move along. All I can say is this car is nuts. Keeps pulling and pulling

Erik@Lashway
04-04-2012, 07:53 AM
Cool!!! Kick some ass man

Thebeast916
04-04-2012, 11:20 PM
This car really scares me now. Did a couple wot runs today and it's just plain nasty.

I have a new respect for this car and really need to behave myself. The power is just so linear as rpms climb. It just never stops pulling. Erik I may stop by the shop in the morning if I have time. I work at 12 and really need to clean the car. I'll shoot you a text.

Dyno numbers and various other numbers Friday morning

Blackbird-WS6
04-04-2012, 11:23 PM
whats trans in your car?

Thebeast916
04-04-2012, 11:24 PM
whats trans in your car?

6l80 with a nice trans tune.

Blackbird-WS6
04-04-2012, 11:25 PM
6l80 with a nice trans tune.

stock stall? nothing done to the trans at all just tune?

Thebeast916
04-04-2012, 11:26 PM
Yep. Stock stall. Doesn't push with cam and blower. Just a really in depth and good trans tune

Thebeast916
04-07-2012, 01:23 AM
Well dynoed the car today and the dynow as not calibrated properly. At 5500rpms car made 496/486 still making power to 6100 rpms.

Air fuel is 11.4. Fuel pressure went from 58 to 52 at wot. Hooked up a mechanical vacuum gauge to read boost and it showed 13psi. That's a little high and I'm trying to figure out why.

Timing is currently at 14 degrees.

I will be going to lashway on Tuesday for a dyno run or two and see where I am really at.

Blackbird-WS6
04-07-2012, 01:47 AM
Well dynoed the car today and the dynow as not calibrated properly. At 5500rpms car made 496/486 still making power to 6100 rpms.

Air fuel is 11.4. Fuel pressure went from 58 to 52 at wot. Hooked up a mechanical vacuum gauge to read boost and it showed 13psi. That's a little high and I'm trying to figure out why.

Timing is currently at 14 degrees.

I will be going to lashway on Tuesday for a dyno run or two and see where I am really at.

it wasnt calibrated properly today or the other days?? bc mine was on the dyno today :(

Thebeast916
04-07-2012, 08:39 AM
My tuners personal dyno wasn't calibrated today before I got on it.

Blackbird-WS6
04-07-2012, 09:42 AM
My tuners personal dyno wasn't calibrated today before I got on it.

Oh ok, I thought lashways wasn't calibrated

What dyno was it? Brand

Thebeast916
04-07-2012, 02:09 PM
Lashways dyno is good. My tuner has his own portable mustang dyno. We just forgot to calibrate it before we put the car on

Erik@Lashway
04-09-2012, 11:32 PM
Yes, let's not confuse the issue. Our dyno is spot on. In fact, it breaks hearts (and egos).

Erik

Thebeast916
04-10-2012, 01:29 PM
Well, here is a video courtesy of Erik at lashway.
Enjoy everyone
http://i302.photobucket.com/albums/nn109/thebeast916_2008/th_b3fd51bc.jpg (http://s302.photobucket.com/albums/nn109/thebeast916_2008/?action=view&current=b3fd51bc.mp4)

I will let his comments show how nasty this car really is

LitiGATOR
04-10-2012, 02:51 PM
So what are the final numbers?

Thebeast916
04-10-2012, 09:49 PM
Didn't dyno it properly. Uncalibrated dyno it made 500/496@5500 rpms. Pulled passed 6000rpms. But dyno was way off with me being at 13lbs. Will have to dyno again soon.

I will be at the private track event on April 22nd at pbir. U going litigator?

littlefranks
04-10-2012, 10:03 PM
dyno numbers dont mean shit to me .proff is in the time slip lol.got to say thats one mean car.

Thebeast916
04-10-2012, 10:10 PM
Without a set of radials my times will suck. I'll spin all the way down the 1/4. I'm going to have to borrow someone's set or just run on my street tires and baby the throttle. Hope to at least run mid 11's. We shall see

LitiGATOR
04-11-2012, 12:27 AM
Your trap will be a great indication and you'll hook just fine after second gear.

Thebeast916
04-13-2012, 12:13 AM
I'd like to trap 120+. Before I ran a 12.81@111. 2.01 60ft.
We will see what it runs April 22nd

LitiGATOR
04-15-2012, 10:29 AM
Your car is definitely making the power to trap over 120.

Thebeast916
04-15-2012, 03:43 PM
We will see. Getting nt05r drag radials on Tuesday from Howard at redline.working a deal for me now

Thebeast916
04-21-2012, 01:28 PM
567rwhp/520rwtq. 9.5 lbs of boost.

Blackbird-WS6
04-21-2012, 01:47 PM
whats the most boost that motor can take? is 9.5lbs safe?

Thebeast916
04-21-2012, 01:58 PM
My buddy Xavier is running 11lbs on e85 and he made 650/620 on his g8

Erik@Lashway
04-22-2012, 11:06 AM
Congrats B!

X's car is well beyond the safe zone on that bottom end. His lifter "tick" is probably an indication of other wear and tear that the engine is suffering even though it is still running around town.


Erik

Thebeast916
04-22-2012, 11:43 AM
I have lifter tick as well with the ls7 lifters. But his seems to be a different sound.

He's definitely making a lot on stock rods and pistons. Definitely need to forge at his level

Thebeast916
04-24-2012, 10:14 PM
Hitting pbir Wednesday night. I'll have some track times then.

Also cut my cats off and retuned the Maf. Completely different car now

Thebeast916
04-26-2012, 10:04 AM
Well track times sucked due to lack of traction in every gear. Ran 12.5 @ 122. 2.0 60ft
Need drag radials badly. I need some more track time with this car to get my launch dialed in. Just too fast for my nitto nt555's

Street Racer
04-26-2012, 07:56 PM
it takes alot of practice for sure ! Your car was super nice I never really checked one out before alot of room in that damn car for sure ! Atleast you have the track rental coming up...

Thebeast916
04-30-2012, 10:35 PM
Thanks man.
Just put in a much better transmission tune as mine was not sufficient enough for wot at the track