PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

crank no start

Thread Tools
 
Search this Thread
 
Old 03-18-2012, 09:34 PM
  #1  
12 Second Club
Thread Starter
iTrader: (2)
 
stangtrader's Avatar
 
Join Date: Apr 2009
Location: PNW
Posts: 900
Likes: 0
Received 0 Likes on 0 Posts
Default crank no start

ok so my car is not wanting to start at all right now and i fired it up yesterday.only thing about this time i loaded a base tune to my pcm via hp tuners.i have spark,fuel pressure and according to my log i also have pulse width and timing.i can post a log of it if need be.car starts on a alternitive fuel source.
so i think it is some thing in the fueling i.thing is when i turn the key on the pump sounds like the systems over pressurized,but if i jumper wire the relay it sounds normal but still no start.im wondering if some thing is up with my new injectors.could i have burnt the coils up in them on a stock tune? i never have heard of that.any ideas im almost at a loss
Old 03-18-2012, 10:13 PM
  #2  
12 Second Club
Thread Starter
iTrader: (2)
 
stangtrader's Avatar
 
Join Date: Apr 2009
Location: PNW
Posts: 900
Likes: 0
Received 0 Likes on 0 Posts
Default

Also vats disabled and security light while cranking




All times are GMT -5. The time now is 06:08 AM.