Midwestern Members - NWI B.S Thread Get Your A** in Here

So what up everyone, how's your projects going? Are they going to be ready for summer.. Figured il make a thread cause we don't have one. :drive:

cool.........


i just got insured.........so i am ready.

whites pit stop still going on wednesdays?

i almost went out last night for a little cruise........but ran into an old friend & shot the shyt for about 4 hours.

No projects going, car just sitting under the cover and probably going to stay there till work slows down at the end of May. How's your turbo build going Drew?

cool.........


i just got insured.........so i am ready.

whites pit stop still going on wednesdays?

i almost went out last night for a little cruise........but ran into an old friend & shot the shyt for about 4 hours.

Believe it or not I've havent been to white pit stop since they were in Lansing :eek2:

No projects going, car just sitting under the cover and probably going to stay there till work slows down at the end of May. How's your turbo build going Drew?

It's total chaos ran out of money. Still need a ton of stuff. Il hopefully have it done by June.. Waiting to ship my heads out for some new ones and get all the little stuff round up :bang::bang:

Just starting a new project, looking to join the cool crowd and build a turbo car too :cheers: Definitely want to get out and about and cruise more this year :drive:

Believe it or not I've havent been to white pit stop since they were in Lansing :eek2:

i got out there once last year........before i blew the 9".

it was nice,alot of cars.but people were already leaving by the time we got there.

Just starting a new project, looking to join the cool crowd and build a turbo car too :cheers: Definitely want to get out and about and cruise more this year :drive:

It's the cool thing to do, I think I talk to you at 41 when you has your white car.. What do you have cookin now?

i got out there once last year........before i blew the 9".

it was nice,alot of cars.but people were already leaving by the time we got there.

Yea il have to meet you up there this summer when my racer is done.. On a side note thinking about doing a 6 point or 8 point cage in my car now :(

It's the cool thing to do, I think I talk to you at 41 when you has your white car.. What do you have cookin now?



Yea il have to meet you up there this summer when my racer is done.. On a side note thinking about doing a 6 point or 8 point cage in my car now :(

cool,sounds like a plan.

depending on how fast you plan on going?.....i have a 6 point & i think thats all i will ever need.

cool,sounds like a plan.

depending on how fast you plan on going?.....i have a 6 point & i think thats all i will ever need.

As fast as I can, right now just hoping o low 10s but well see how that goes. :cheers:

It's the cool thing to do, I think I talk to you at 41 when you has your white car.. What do you have cookin now?

I currently have a S/I 6-speed car that's my daily, but I have another 4th gen roller coming that will be getting a little 5.3 love, nothing crazy though, that's what I have the Nova for :drive:

What do you all need for your car?

I currently have a S/I 6-speed car that's my daily, but I have another 4th gen roller coming that will be getting a little 5.3 love, nothing crazy though, that's what I have the Nova for :drive:

What do you all need for your car?

Converter,cold side,injectors and a elbow/throttle bottle..

i cant wait to get this lq4 built so i can drive it again haha should be done in the next two weeks got my tune scheduled for the 28th

i cant wait to get this lq4 built so i can drive it again haha should be done in the next two weeks got my tune scheduled for the 28th

Damn you suck, I'd you get your ls1 pulled? See how bad it was??? Details DAMiT :angel:

Converter,cold side,injectors and a elbow/throttle bottle..

What intake are you running? I have an elbow for a Vic Jr set-up,

Damn you suck, I'd you get your ls1 pulled? See how bad it was??? Details DAMiT :angel:

havent pulled it out yet but i can assure u its toast lol i found a bunch of aluminum chunks in the intake

havent pulled it out yet but i can assure u its toast lol i found a bunch of aluminum chunks in the intake

Man thats always good :eek2: Mine ad a hole in it when it blew up and instill ran fine, just spilt out a bunch of oil.. Let me kno if you need a had il come by. Drew

What intake are you running? I have an elbow for a Vic Jr set-up,

I have a super victor.. It should work. Pm with some details... Drew

Converter,cold side,injectors and a elbow/throttle bottle..

Not too bad, should be soon

Not too bad, should be soon

Yea hopefully, is the new roller like the white car or just a starter???? :cheers:

always ready

Yea hopefully, is the new roller like the white car or just a starter???? :cheers:

Kinda a starter, no cage, but has a decent amount of suspension work done. Need a bunch of stuff, i'll have to make a list and post it out here lol.

Kinda a starter, no cage, but has a decent amount of suspension work done. Need a bunch of stuff, i'll have to make a list and post it out here lol.

Yea that's good, should run good have you picked what size turbo your going?

always ready

I'm jealous your car has like no miles :sack:

anybody going out & about tonight?

Yea that's good, should run good have you picked what size turbo your going?

Nope, trying not to go too big, but we'll see :D

So I'm thinking of selling my motor and hot side stuff and going all out. Maybe a lsx block 88-90mm turbo?

So I'm thinking of selling my motor and hot side stuff and going all out. Maybe a lsx block 88-90mm turbo?

Holy crap, went from no money to all the big $$ stuff lol. I know how it is, good luck

Holy crap, went from no money to all the big $$ stuff lol. I know how it is, good luck

Yea lol well see.. Oust don't want to regret it.. How it looks now, I'm goin to put it together and get some numbers and build something crazy to swap it in.. Lol

Bump lol kinda boring!!!

Bump lol kinda boring!!!

I'm calling out your turbo setup, lets :lock: it up :D

^ ill side bet 100$ on 98camZ :judge:

What do u need pics or you talkin about running?? I'm lost lol

^ ill side bet 100$ on 98camZ :judge:

Thanks Kevin :gtfo: lol

calling out for a Money race i think, and you know im just kidding i swear i dont even gamble

I'm talking about running :D I'm j/k though, it'll be a long time before i'm out. I'd run for fun with my bolt on DD though :nod: Not fast but its fun rowing through the gears

I'm talking about running :D I'm j/k though, it'll be a long time before i'm out. I'd run for fun with my bolt on DD though :nod: Not fast but its fun rowing through the gears

I was goin to say if it's like ur white car I'm goin to need my wood screw :eyes::

calling out for a Money race i think, and you know im just kidding i swear i dont even gamble

Lol idc :engarde: it's all good fun:usa:

i am calling you both out for a money race. i dont care if you put a 106mm turbo on it.

i am calling you both out for a money race. i dont care if you put a 106mm turbo on it.

Ok, i'm bringing out the Nova then :burn: I might need the spray on it though lol

Ok, i'm bringing out the Nova then :burn: I might need the spray on it though lol

i aint scared. after i bust you up, i will be driving my car home while you load your racecar up on the trailer.
http://i19.photobucket.com/albums/b190/lt1camaroman93/Twint%20Turbo%20SN%2095/20120114_213042.jpg

i aint scared. after i bust you up, i will be driving my car home while you load your racecar up on the trailer.
http://i19.photobucket.com/albums/b190/lt1camaroman93/Twint%20Turbo%20SN%2095/20120114_213042.jpg

I hate you and this picture, I might as well pay up now :mad:

looks like i will be just a spectator..........

looks like i will be just a spectator..........

Yea same here.. They did a bad ass job on his setup!!!!

i aint scared. after i bust you up, i will be driving my car home while you load your racecar up on the trailer.

Damn!!! Lol, i'm sure you will, can't wait to see that out :nod:

I hate you and this picture, I might as well pay up now

I saw this in person the other day...it's definitely a streetcar still, just setup nice. I'd DD this :nod:

I saw this in person the other day...it's definitely a streetcar still, just setup nice. I'd DD this :nod:[/QUOTE]

Fucker I didn't get to see it yet:bs::D

It was strictly business lol

It was strictly business lol

That's what they all say lol, but how is your car coming along?

That's what they all say lol, but how is your car coming along?

Haven't touched it, just waiting on my engine to come in and trying to find a trans cheap. It'll more than likely first come out on motor as I try to find some good deals on parts

I have a built th400 with brake, new.

I have a built th400 with brake, new.

I should've been more specific, i'm looking for a 4l80 cheap, not one of those non-overdrive racing trans ;)

PM me your dad's number lol

I should've been more specific, i'm looking for a 4l80 cheap, not one of those non-overdrive racing trans ;)

PM me your dad's number lol

I was goin to say the same thing th 400 with brake forsale lol

Anyone can build me a nice cold side? Pm me

Fucking indiana people and there damn race cars

I'm in to cruise after I finish turnaround.

Fucking indiana people and there damn race cars

Get outta here you IL guy :jest:

Fucking indiana people and there damn race cars

Mines a street car :nod:

I'm in to cruise after I finish turnaround.

Hit us up

Get outta here you IL guy :jest:

:gtfo: lol jp

I'm in to cruise after I finish turnaround.

what do you mean about turnaround?

It's for work. I do inspections in the industrial field, mainly refineries. Citgo in Illinois is having a shut down on a few units and I'll be busy doing inspections working 90-100 hours a week till about the first week of June.

Ahhh that's what I figured. I didn't know if you were talking about the work goingt on at citgo or BP though. I am an operations specialist at the BP refinery in whiting.

Ahhh that's what I figured. I didn't know if you were talking about the work goingt on at citgo or BP though. I am an operations specialist at the BP refinery in whiting.

That's cool. It has been pretty busy out there for awhile. I was out there for a few days last month but now my badge is expired and I spend most of my time at Citgo now that I'm a technician. I work for Team, were stationed at BP but I'm sure you know that lol.

Get outta here you IL guy :jest:

I just moved back to IL. I was in Indiana for awhile cup cake. I'll leave you race car drivers alone now.

I just moved back to IL. I was in Indiana for awhile cup cake. I'll leave you race car drivers alone now.

so are you an illianaian? :mullet:



where did you move from & too....... :chug:

I work for Meade but I'm just. Teamster kno fancy titles :bang: :bs:

RacerXLs1 I see you posting over on TCG forums a lot lol. Any one going to be out driving around this weekend?

I work for Meade but I'm just. Teamster kno fancy titles :bang: :bs:

Who has your old Goat? Saw it the other day, had to be yours cause it's the only one I've seen with that hood.

Who has your old Goat? Saw it the other day, had to be yours cause it's the only one I've seen with that hood.

My dad has it now, might of been my bro driving it :bang:

I need a engine crane DAMiT.. Hopefully dropping the car next month to get the cold side done.. Finally!!!!

I need a engine crane DAMiT.. Hopefully dropping the car next month to get the cold side done.. Finally!!!!

That's awesome to hear, any pics of the project so far?

That's awesome to hear, any pics of the project so far?

If you got a number I can text you some..

My street car is ready!!! Its a turd but shes mine. No cage so it looks like ill be running Ultimate shootout again at 41

My street car is ready!!! Its a turd but shes mine. No cage so it looks like ill be running Ultimate shootout again at 41

you meen garage queen?

the only miles you put on that car any more are 1/4 mile @ a time........

Portage to Orland Hills.

Portage to Orland Hills.

Shit I don't blame you... It's pretty nice over there :usa:

you meen garage queen?

the only miles you put on that car any more are 1/4 mile @ a time........

I wanna go fast!!! and the cops dont like to let me

whites cruise nite tonight?

NWI sucks and so do LS motors!

Hey guys I'm havin some trouble with the 6.0 I'm puttin in its got bad rust pits and needs be bored .30 and I don't wanna put the money into it for new pistons and balance. So if you know anyone with a standard bore lq4/9 or ls2 block that doesn't need to be machined for sale let me know or an ls1 longblock for sale

Hey guys I'm havin some trouble with the 6.0 I'm puttin in its got bad rust pits and needs be bored .30 and I don't wanna put the money into it for new pistons and balance. So if you know anyone with a standard bore lq4/9 or ls2 block that doesn't need to be machined for sale let me know or an ls1 longblock for sale

It can't be honed out???

its pitted too deep machine shop said it needed to be bored then i would have to get new pistons and a balance to i just dont wanna put that much into it since its pretty much cam only with milled 317s

its pitted too deep machine shop said it needed to be bored then i would have to get new pistons and a balance to i just dont wanna put that much into it since its pretty much cam only with milled 317s

Damn that sucks man.. If you had the extra cas there's that 370 short block for $2300

Motor is goin in this weekend oh yeaaa!!!! Bump!!!

So kinda died today. Lol. Well the good thing is the motor is in the car!! Just need a couple things for the trans and off to the fab shop!!!

LOL at the thread title... so how about all this rain were getting

LOL at the thread title... so how about all this rain were getting

Lol thanks, anyone going to Kots Saturday?

is KOTS still at the Wisconsin track (GLD?)? or us41?

GLd !!!!

I need some aftermarket fuel rails and a 90mm or bigger throttle body...