View Full Version : Bad paint crack, 6.5 @ 111 on stock suspension

04-08-2012, 12:31 AM
Ok, I knew it wouldn't be much longer before i would need to start doing some suspension mods, was hoping to hold off to shoot for 150mph in the 1/4 this year but if the car is gonna twist itself apart than i might as well start the mods... What should be done first? Subframe connectors? I have an 8 pt cage welded in the car and thought this would be enough. Only other mod that isn't factory under the car is the chassis ta, still have the 10 bolt.

04-08-2012, 03:10 AM
That cage could use some modifications to help with torsion under load. More notably the rear section

04-08-2012, 11:19 AM
that roll bar don't look legal for 9s.get a nhra rule book ,unless you plan to make 1 run and get kicked out.

04-08-2012, 03:59 PM
What's the pic of? The rear bumper and 1/4 panel? If so it looks like they were painted over by someone and not done the correct way.