Suspension & Brakes - Review my ALL wear & tear items checklist

Already have the shocks and springs.

So far I know but don't know how much of each.

Front:
Upper & Lower control arms bushings (4)?
Sway bar bushings (2)?
Sway bar End Links (2)?
Tie Rods(2)?
Ball Joints Lower & Upper ?

Rear:
Lower Control Arms bushings (2)?
Sway bar bushings (2)?
Any end links ?

what am I missing and how much of all of these do I need?

Already have the shocks and springs.

So far I know but don't know how much of each.

Front:
Upper & Lower control arms bushings (4)?
Sway bar bushings (2)?
Sway bar End Links (2)?
Tie Rods(2)?
Ball Joints Lower & Upper ?

Rear:
Lower Control Arms bushings (2)?
Sway bar bushings (2)?
Any end links ?

what am I missing and how much of all of these do I need?

For the front there should be 4 ball joints total. two per side, upper and lower.

Also you might want to check the bushings (or rod ends, or poly if you have an aftermarket one) for the panhard bar.

Check out this thread:

http://www.ls1tech.com/forums/suspension-brakes/945787-bringing-suspension-back-dead.html

whoa! many thanks for that link!