Deuce01
04-15-2012, 01:57 PM
I have a 2001 WS6 M6 with slp 1 3/4 lt headers, slp lid, and slp 3in louthmouth 1 exhaust. I was planning to go turbos in the future so i was going to add some ported lq9 heads and a cam with 227 duration and 614/610 inch lift. Is this a good setup and what i can expect my flywheel and rwhp to be once tuned. Thanks for the info.
Deuce01
04-15-2012, 02:21 PM
Ok if im at about 350rwhp now. What i should expect from the heads/cam combo?
TransamGCS
04-15-2012, 02:33 PM
[QUOTE=Deuce01;16200386]Ok if im at about 350rwhp now. What i should expect from the heads/cam combo?[/QUOTE
your not at 350 rwhp with your set up i would say your around 310 to 315
S8ER95Z
04-15-2012, 02:38 PM
My 01 made 324rwhp/341rwtrq with just FRA. He's probably pretty close to 350rwhp depending on the dyno used. ;)