Mr Powell

iTrader: (1)

I can't use a search button or look at the sponsor section.... So I'm going to make a thread that gets locked in a few hours, and then my friend will make one like 2 days later asking same question.


<3 Craig
<3 Tony
<3 Dennis
<3 B
<3 Mods

Waiting on the dude to come fix my washer so figured it was time for something.

FlashWS6

iTrader: (18)

Hey guys can someone tell me what lid is best for my 02 z28?

Is MTI still having the special on the clear lids?

99zee

iTrader: (4)

BizZzatch350

iTrader: (33)

I got an SLP lid for sale, brand new. Go buy a time machine and take this lid back with you

-Ross-

iTrader: (2)

S Cam!!!!!!!

GTOSE

iTrader: (1)

Which is best?

LS1 or LT1.

99 DUKE'Z 28

iTrader: (17)

I got a 99 camaro, and I can't find my optispark. Any help guys?

5w20

iTrader: (21)

to descreen the maf or not? i heard it could run bad if removed..

Mr Powell

iTrader: (1)

Jayson @ MTI - "You realize within like 2 seconds you guys are freezing the MAF with that dry kit mounted there!" (Nozzle came up at the bottom of the MTI Cold Air where the MAF is)

Me - "Will it blow up if we continue to spray?"

Jayson - "No because I have it dumbed down but it's just not a good idea."

Me and Matt - "Not blowing up is the only thing we cared on what you just said"

408rwhp on motor ... 630rwhp on a BIG dry kit... When the 427 was put together the took apart the stock motor and Cam pushed the pistons out with his fingers once the crank was out. LOL!

I know Jayson misses us

-Ross-

iTrader: (2)

Who should I get to install my cutout?

BizZzatch350

iTrader: (33)

CXI, they dd the Borla on a buddies 94 Z28, still holding up 13 years later

SSHAWK

iTrader: (14)

Who has the list of all the Free mods??? I heard it give you like 25 hp with all of them done.. hahaha

BT03mach-1

i can i find out if my 02 Z28 came with a ls3 or ls1

NemeSS

iTrader: (127)

I just got my maf translator from ramchargers.
Im gonna be able to tune my car now. +/- 5% fuel and spark trims
Should i remove my egr too?
I heard it makes ur computer go crazy?

-Ross-

iTrader: (2)

I'll pick up 47rwhp with these badass ported heads. They only cost me $3k. After I save up another $2.5k, I'll get that cam kit and longtubes and break the 400rwhp mark!

FlashWS6

iTrader: (18)

I hear that chuck guy @ HPE is a great tuner, anyone use em before?

Rob's 02 SS

iTrader: (31)

Haha good **** . Haven't heard that name in a couple years.

-Ross-

iTrader: (2)

Should I tell them I want it "ZED style"?

1lejohn

iTrader: (9)

Doing it behind the tiddy bar on Sunday after noons

Nine Ball

iTrader: (38)

**** youngsters, those aren't the O.G. LS1 mods.

-Spark plug brand and gap debates circa Jan 1998 on LS1.com
-Resistor in IAT mod
-Short-belt mod
-Fernco plumbing coupler on the factory airbox
-Dremel ported MAF's
-Grinding calipers to fit 15" wheels
-HPP3 tuning like a ****
-Cutting the EGT tube off
-Replacing ball-socket flange on MAC headers with collectors
-Custom made Y-pipes
-Ported factory throttle bodies with "knife edged" blades and shaft.

That was only 14 years ago. ****. Most of these current owners were 2 yrs old.