Vehicles Wanted - roller!!!!

I want a roller for my ls1 i have sitting

-98-02 fbody
-c5
-1970 chevelle
-1967-1969 camaro

NO TAN INTERIOR
NO VERTS

any color fine
prefer m6
prefer ttops/targa
prefer to have everything but motor
willl drive a few hours
will pay cash

Pending z28

Upppp

Bumpping

Yep still looking

I have a 96, street/strip project that I might get rid of, since I am buying a house. It is set up for ls1. It has a TH400, 9in rear, all tubular suspension, 10pt cage, and a supercharger. I am willing to work with ya on what parts you want. Check my sig for pics. Still needs wiring, paint, and driveshaft. Pm me if you are interested.

ehh not interested in that

i have a black m6 99 ta may sell as roller in tx. 117k miles on body. very good condition in/out.
pm if interested

I have a green 98 ta WS6 hood, that will be sold rolling in the next couple weeks, its an auto but I have 6 speed pedal you could switch over or stay auto. PM if you intrested

Send pics to bashamjosh57@yahoo.com

http://s1204.photobucket.com/albums/bb406/bigjay187/
mine are in there, you want more detail lmk

I could use more pics of the under and the interior and any defects. Need mileage, proce, what it includes, and what it needs. Clean title? How many owners?

Me or him?
Clean title yes in my name its coming in the mail
195K on body, suspension is much less, rear stock 10bolt 40k on it
Underside when I pull the motor Ill shoot the under side when I have the body up in the air.
Upper console lide is nast rest of interior is pretty dam nice. Driver bolster is little wear rest is nice no door crack or dash cracks. I can sell it with auto harness and ECU and wheels but you will pay for them I wont give the car away. Its got some flat screen flip out radio I hate and the steering wheel controls are gone.
Jay

BOtH of YoU. PRICE?

2400 with ECU harness still in car on roller wheels
PM if you want to talk more.
Jay

http://s1204.photobucket.com/albums/bb406/bigjay187/
Go there my chevelle pics are in there too. There is small scratch in clear, and chip in the corner of the hood. The aftermarket hood is little weird near the snot, you will see. Paint is 16 months old and really nice for a street car.
Jay

uppp weeee goooooo

1990 fox body mustang hatchback, all front team z suspension set up for ls1, strange coil overs, 5 lug conversion, th400 with deep alum pan and hipster trans brake and brand new rebuild kit still in box. all parts have 0 miles on them. white exterior, blue interior, all complete entire car is 9/10 inside and out still have 2.3 motor and trans that came out of the car if desired.

3000.00 obo title in hand

Pics please (:

Pms and texts replied

awaiting some pms and emails. others replied

texts responded. still looking

hmmmm

pm replied nene

uppp still looking

anyone interested in my car i am not really interested in parting it out as everything i have purchased is all part a plan and it would take someone doing the same thing to sell off some of the other parts,or a car without a motor.see the attachment
HOW MUCH ARE YOU WANTING TO SPEND ON A ROLLER THIS IS MINT SHOW READY JUST DROP IN YOUR MOTOR IF NOT WANTING MINE THE LSX454





1999 TRANS AM INTERIOR IS GRAY LEATHER, ALL STOCK ,AND IN GOOD CONDITION.. ALL WINDOWS ARE TINTED 10% REALLY DARK.EVERYTHING WORKED AT TIME OF DISASSEMBLY.HAS AFTERMARKET RIMS CHROME,I HAD NO INTENTION OF REUSING THEM WITH NEW BODY WORK.T-TOPS PERFECT.
16K WORTH OF BODYSHOP WORK ,AND PAINT COMPLETE COLOR CHANGE (HOUSE OF COLORS) TANGELO PEARL INTERIOR FLOOR PANELS PAINTED ALSO.
ALL ELECTRICAL PARTS THAT ARE UNDER THE BODY PANELS OR HIDDEN AND HARD TO GET TO HAVE BEEN REPLACED(SO NO PANELS WOULD HAVE TO BE REMOVED FOR REPAIRS IF EVER NEEDED)
HEADLIGHT DOOR MOTORS,WINDSHELD WASHER PUMP,ALL LIGHTS,HORNS,TOO MANY SMALL PARTS TO LIST.ALL UNDERSIDE PLASTIC,& FENDER WELLS COVERS ARE NEW,ALL LENSES,EVERY PART HAS BEEN PAINTED BEFORE BEING REINSTALLED. BODY WAS COMPLETELY DISAMBLED AND PAINTED PIECE BY PIECE. ENGINE HARNESS COMPLETELY REDONE,RELOOMED,ALL WEATHER STRIPPING REPLACED,NEW RAPTOR RAMAIR HOOD.ALL FRONT BUMPER SUPPORTS REMOVED AND REPLACED WITH BURKHART CHASSIS SUPPORT..UNDERSIDED COMPLETLY STRIPPED AND CLEANED AND REINSTALLED ALL PARTS.FUEL TANK REINSTALLED WITH 340 PUMP KIT RACETRONICS HARNESS KIT,NEW SPRINGS,FRONT AND REAR SHOCKS,MOUNTS,SPRINGS SUPPORTS ETC..EVERY STOCK SUPENSION PART HAS BEEN REPLACED WITH EVERY BMR PART MADE FOR THE CAR INSTALLED. NEW POWER COATED SPINDLES.FRONT SPITTLER

EVERY NUT AND BOLT PAINTED BEFORE BEING REPLACED,
DOOR HINGES REDONE,THERE ARE JUST SO MANY PARTS REPLACED IT CAN NOT BE LISTED EVERY BODY PART WAS REMOVED. NEW POWER RADIO ATTENNA

LISTING OF NEW PARTS EITHER STILL IN BOX OR INSTALLED DURING BODYSHOP ASSMEMBLY ( AFTERMARKET & GM )
6LITEREATER DESIGNS FRONT SPILTTER $450.00
SUNCOAST RAM AIR RAPTOR HOOD $760 PLUS SHIPPING $150.00
ALL NEW LENSES $150.00
HEADLIGHT DOOR MOTORS $600.00(GM),WATER BOTTLE MOTOR,HORNS,POWER RADIO ANTENA, ETC..ALONG WITH ANY ELECTRICAL PARTS UNDER THE BODY PANELS
WERE ALSO REPLACED WITH GM PARTS(TO PREVENT HAVING TO REMOVE ANY PANELS AT LATER DATE FOR REPAIRS) ABOUT $800.00
ALL NEW GM WEATHER STRIPPING $500.00
NEW BODY PARTS (GM)
NEW INNER FENDER WELLS (GM)
ALL UNDERSIDE PLASIC PARTS WERE REPLACED (GM)
DOOR HINGES REPLACED
WIRING HARNESS RELOOMED AND CHECKED FOR ANY ISSUES $300.00
6 LITEREATER DESIGNS BLANK GAUGE CLUSTER TO INSTALL AUTOMETER GAUGES IN PLACE OF STOCK CLUSTER $40

ALL BELOW INSTALLED
PROTHANE MOTOR AND TRANS MOUNTS. $200.00
NEW SPRINGS,MOUNTS,STRUT MOUNTS $350.00
NEW TOKICO HP SERIES PERFORMANCE FRT AND REAR SHOCKS $440.00
BMR K-MEMBER LS1 SET UP FOR FACTORY MOTOR MOUNTS $520.00
BMR ADJUSTABLE FRT UPPER AND LOWER CONTROL ARMS $440.00 & $350.00
BMR FRT AND REAR SWAY BAR KITS 35MM & 25MM HOLLOW $ 400.00
BMR REAR LOWER ADJUSTABLE CONTROL ARMS $280.00
BMR PANHARD ROD ADJUSTABLE $149.00
BMR PANHARD ROD RELOCATION KIT $ 210.00
BMR TORQUE ARM ADJUSTABLE BOLT ON $ 399.00
BMR 4L80 TRANSMISSION (CONVERSION) CROSS MEMBER /TORQUE ARM RELOCATION MOUNT $249.00 (INTENDED INSTALLING 4L80)
BMR DRIVESHAFT SAFETY LOOP & TUNNEL BRACE $110.00
BMR SUB FRAME CONNECTORS BOXED WELD ON $170.00
BURKHART FRT CHASSIS AND BUMPER SUPPORT $250.00
GM POWER COATED SPINDLES $300.00

NASTY PERFORMANCE BILLET FUEL RAILS & F-BODY FUEL LINE SYSTEM,ALL FITTING NEEDED TO CONNECT TO STOCK FUEL LINE $339.00
60LB INJECTORS MOTOTRON $ 385.00
RACETRONIX 340 PUMP AND HEAVY DUTY HARNESS WITH EXTRA GROUND CONNECTION $249.00

FAST 102MM INTAKE MAINFOLD PORT BY TONY MAMBO FROM AFR(WORTH 15 TO 25 RWHP OVER STOCK 102) $900.00,$250 PORTING,$200.PAINTING= $1350.00
FAST INTAKE PAINTED TO MATCH VALVE COVERS (LSX454)
102MM THOTTLE BODY $359.00
COOLANT CROSS OVER PIPE KIT (GM PARTS) $109.00
TCI 8 BOLT FLEX PLATE $220.00
LINGENFELTER CONVERTOR BOX 58X TO 24X $220.00
ARP BALANCER BOLT $30.00
NEW GM OIL DIP STICK & TUBE $30.00
NEW GM OIL PUMP PICK UP TUBE AND SCREEN $50.00
MSD 3 HP LS1-LS7 STARTER $ 239.00
KOOKS 1 7/8 LONG TUBE HEADERS WITH LS7 FLANGES $1250.00
KOOKS COMPLETE DUAL EXHAUST WITH X PIPE POLISHED MUFFLES AND QUAD TIPS,(THIS KIT WAS THE VERY FIRST PRODUCTION UNIT SHIPPED)
UNIT IS MARKED AS THE FIRST KIT,GOOD TO 1200 HP DUAL 3 INCH ALL THE WAY BACK. (THE FINEST KIT ON THE MARKET) $1900.00
LSX 454 GM CRATE MOTOR 620HP,590 TQ BRAND NEW AS FROM GM.STILL SEALED $10,400. WITH TAX
ALL ENGINE BRACKETS HAVE BEEN POWER COATED $250.00
NEW GM F-BODY OIL PAN PAINTED TO MATCH LSX BLOCK $ 220.00,PAINT $100.00
LATE MODEL GM 4L80 TRANSMISSION
ELDEBROCK LS1 WATER PUMP HIGH FLOW
HIGH FLOW THERMOSTAT AND HOUSING

ABOUT 44,000.plus INVESTED, OR AT LEAST THAT IS WHAT IS LISTED ABOVE,THERE ARE SOME PARTS I HAVE FORGOTTEN TO LIST

THE CAR IS STILL AT THE BODYSHOP STILL HAS A FEW SMALL DETAILS TO COMPLETE NEEDS ITS FINAL WET SAND AND BUFF THE BILL IS PAID ALL 16K PLUS NOW
THIS CAR WAS BUILT TO BE A SHOW CAR THE UNDERSIDE IS PAINTED AND SPOTLESS IT WAS ALSO MEANT TO RUN 9'S ON SPRAY SHOULD BE ABLE TO RUN 10'S OFF THE BOTTLE WITH THE A/C ON (LOL). I WAS CRIRPPLED IN A MOTOR CYCLE CRASH AND JUST HAD SURGERY THAT WENT WRONG WE BELIEVE I WONT BE ABLE TO DRIVE AS I AM FROM THE CHEST DOWN UNABLE TO MOVE AND HAD TO HAVE MY NECK FUSED DUE MY SPINAL CORD SPLITING IN TWO LAST MONTH