Cam Recommendations Needed
03-27-2004, 04:58 AM
#1
Staging Lane
Thread Starter
Join Date: Feb 2004
Location: North East PA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Cam Recommendations Needed Hi guys, I just recently purchased a Midwest 3700 TC with a 2.5 str. I'm looking for suggestions on a good cam to run with this TC and stock 2.73's. I figure I can get away with the original rear for this summer if I only put a healthy cam and TC in the car and stay away from DR's for now. I'm looking for a cam that will give me the most HP and torque possible with a good dyno tune. However, I'm not looking to get as 'lift happy' as the T-REX (remember, only 3700 stall). 
I just don't have the money this summer to afford a new rear w/ a head and cam package, add to that a tranny rebuild. 
Any suggestions? Thanks guys.
I just don't have the money this summer to afford a new rear w/ a head and cam package, add to that a tranny rebuild. Any suggestions? Thanks guys. 
Trending Topics
03-28-2004, 08:07 AM
#8
On The Tree
Join Date: Mar 2004
Location: Tulsa, Oklahoma
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
I just dynoed 408 rwhp @5750rpm and 405 rwtq @4750rpm with a slipping clutch through full exhaust with the Lunati cam I mentioned.
Last edited by evil02z; 03-29-2004 at 08:06 AM.
03-28-2004, 12:59 PM
#9
Banned
iTrader: (45)
Join Date: Aug 2003
Location: NC
Posts: 2,556
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by evil02z
I just dynoed 408 rwhp @5759rpm and 405 rwtq @4750rpm with a slipping clutch through full exhaust with the Lunati cam I mentioned.
03-28-2004, 11:25 PM
#11
Launching!
Join Date: Jul 2002
Location: Port Saint Lucie,Fl
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by evil02z
I just dynoed 408 rwhp @5759rpm and 405 rwtq @4750rpm with a slipping clutch through full exhaust with the Lunati cam I mentioned.
