KingKiller's 76mm Cobra vs Beans GSXR 750
#1
10 Second Club
Thread Starter
Join Date: Jul 2010
Location: RI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
KingKiller's 76mm Cobra vs Beans GSXR 750
Jared8 and that SRT kid, your input isn't welcome here.
KingKiller - Terminator Cobra, Precision 76mm on 25psi, 93 & Meth
Beans - K5 GSXR 750, Filter, exhaust, tune
Cobra was brake boosting and misfired on the hit. Reeled me in harder than i realized after that. I shouldn't have taken his lane, he should have lifted sooner. I was wide open from "Go" to the end of the vid, never lifted at all. Shot on wide angle GoPro.
At least his username doesn't need to be changed to BeansKiller, lol.
Full Screen recommended.
http://www.youtube.com/watch?v=GCcXA...ature=youtu.be
KingKiller - Terminator Cobra, Precision 76mm on 25psi, 93 & Meth
Beans - K5 GSXR 750, Filter, exhaust, tune
Cobra was brake boosting and misfired on the hit. Reeled me in harder than i realized after that. I shouldn't have taken his lane, he should have lifted sooner. I was wide open from "Go" to the end of the vid, never lifted at all. Shot on wide angle GoPro.
At least his username doesn't need to be changed to BeansKiller, lol.
Full Screen recommended.
http://www.youtube.com/watch?v=GCcXA...ature=youtu.be
Last edited by Beans; 05-01-2012 at 11:48 AM.
#3
10 Second Club
Thread Starter
Join Date: Jul 2010
Location: RI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
He melted a piston during this run. I'm sure he'll be coming back even stronger on a new motor in a few months.
Last edited by Beans; 05-01-2012 at 11:51 AM. Reason: Grammar!
#5
TECH Apprentice
Join Date: Dec 2011
Location: Maryland, but home in Detroit alot!
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Oh shyt... run for your life.... glad your ok homie! So thats why they call them Terminators...lol. jus kidding. So that should tell you its time for a faster bike...
I took his lane, he lifted late and then had to brake on skinnies, which didn't work too well. He's on the brakes when Evan bobbled the camera (while trying to brace himself for impact) and was still catching me...and i was still wide open.
He melted a piston during this run. I'm sure he'll be coming back even stronger on a new motor in a few months.
He melted a piston during this run. I'm sure he'll be coming back even stronger on a new motor in a few months.
Trending Topics
#9
TECH Apprentice
Join Date: Dec 2011
Location: Maryland, but home in Detroit alot!
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Well the hell does(did) that Cobra put down? 25psi and meth is a killer combo in my STi. Can only imagine what that looks like in a V8!!
#10
10 Second Club
Thread Starter
Join Date: Jul 2010
Location: RI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
The Cobra is a beast. If he didn't misfire at the start and we didn't hit traffic he would have pulled me pretty hard.
#11
10 Second Club
Thread Starter
Join Date: Jul 2010
Location: RI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
#16
Teching In
Join Date: Sep 2010
Location: Indianapolis Area
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#17
^ I hear what your saying but when u get to high power levels no rubber is going to hold the ground good enough on the street. I'm a high roller as well . Hondas do take the heat for a lot of **** . Looks like urs runs strong that's few and far around here.
Cobra was running strong. Beans I want to run you once I get my tranny in. Day time stuff on a Sunday or something
Cobra was running strong. Beans I want to run you once I get my tranny in. Day time stuff on a Sunday or something
#18
10 Second Club
Thread Starter
Join Date: Jul 2010
Location: RI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts