Need plug for stock LS1 return hard line.
#1
TECH Veteran
Thread Starter
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
Need plug for stock LS1 return hard line.
Need a plug for this. It's the stock LS1 return line at the T after the filter. Need a plug to go in the old line.
Anyone know what size it is?
-=EDIT=-
Looks like an M14 1.5 metric adapter fitting. Gonna have to take a gamble and just pick one. Gotta get this car done asap.
Anyone know what size it is?
-=EDIT=-
Looks like an M14 1.5 metric adapter fitting. Gonna have to take a gamble and just pick one. Gotta get this car done asap.
Last edited by bayer-z28; 05-02-2012 at 08:32 PM.
#4
Launching!
iTrader: (19)
Join Date: Jul 2010
Location: Groton, CT.
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Bring me the fitting and the hose and I'll weld it into a plug for you. Other wise start by checking the thread on the fitting. Was the m14 too big/small was it the right size but just didn't thread all the way?
#5
TECH Veteran
Thread Starter
iTrader: (14)
Join Date: Apr 2005
Location: N. Falmouth MA
Posts: 4,085
Likes: 0
Received 0 Likes
on
0 Posts
Groton, eh? My buddy has a shop in middletown. Was thinking about bringing it to him to have him weld it up. Wouldn't mind a road trip though.
The M14 size was fine, but the o-ring seat was too big, and the threads were off. Prolly a 1.25 thread. Didn't try to thread it.
The M14 size was fine, but the o-ring seat was too big, and the threads were off. Prolly a 1.25 thread. Didn't try to thread it.