Dynamometer Results & Comparisons - Lets Guess ! LOL! Sorry guys!

OK so bought a so called 427 g8 of ebay afr 225 heads ! Kook headers 1 7/8 !
Callis this k1 that !
BULLSHIT Dyno at 413 hp 409 trq

Tore motor down and found a ton of shit wrong including that compression was at 7.56
Had a stock crank in it
-11 cc dish pistons
3 broken lifters ?
But old car still ran ok
8.20 89 mph in 1/8th

OK so just finished
Afr 230 v2 heads mamofied along with 102 mamofied intake!
4.030 block with a 4.100 stroke
decked to 00.2 with -11 cc dished weisco piston and k1 6.125 rods
11.6 to 1 compression quench right at .040
Ported 90 mm tb for now
42 lbs inj
kooks 1 7/8 headers
Comp cam 247-251 on a 112
3400 yank stall
Where should she be at for power and 1/8th mile !

Wow, I would be pretty pissed after that discovery! Any recourse from the seller?

He told me he would take care of it all ! Sent a check that bounced !
:mad:

I am going to guess, if this is a 427 now, youll make around 470rwhp on 92-93octane.