82cetuner
05-08-2012, 09:22 PM
I have a 418 with Linkbar lifters, its a stock block so I assume I need part 5289 which is a pair of link bar lifters not the set, where is a good place to get them from? I am positive the plunger failed on it.
I dont think there are any other type of morel linkbar lifters that are used with stock trays, all the other ones I see are for warhawk or other type blocks.
I would like to order the lifter before I tear down the motor, 99% sure this is the problem is I have a slight lifter knock would like to get it replaced before any seriouse damage is caused.
__________________
I dont think there are any other type of morel linkbar lifters that are used with stock trays, all the other ones I see are for warhawk or other type blocks.
I would like to order the lifter before I tear down the motor, 99% sure this is the problem is I have a slight lifter knock would like to get it replaced before any seriouse damage is caused.
__________________