jokergerm
05-09-2012, 11:13 PM
So i am swapping a LY6 in to my YJ wrangler and i am running a NV4500
I have a clutch and flywheel from a LT1 that was in my jeep. I assume the flywheel wont fit the LY6 motor
But if i get a new flywheel for the LY6 will the cltuch and pressure plate work on the new flywheel its a 10.5 inch cltuch and the bolt holes on the pressure plate measure about 11 5/8 where they mount to the flywheel
I plan on running the Mast cam 505hp, i wonder if i need a stronger clutch, the one i have is just a LUK basic clutch
I have a clutch and flywheel from a LT1 that was in my jeep. I assume the flywheel wont fit the LY6 motor
But if i get a new flywheel for the LY6 will the cltuch and pressure plate work on the new flywheel its a 10.5 inch cltuch and the bolt holes on the pressure plate measure about 11 5/8 where they mount to the flywheel
I plan on running the Mast cam 505hp, i wonder if i need a stronger clutch, the one i have is just a LUK basic clutch