Florida Members - ok so i sprayed the monte on dyno tonight



PDA
littlefranks
05-11-2012, 09:37 PM
on motor car made 426 hp 587 tq .on a 175 hit 543 hp 681 tq.car ran 10.92 @123 mph on motor .nos pass hopefully next wendsday.;)

+badss+
05-11-2012, 11:39 PM
very nice..
Blackbird-WS6
05-11-2012, 11:43 PM
your making a shit load of TQ on motor, what motor you running and what mods??

3fingas
05-12-2012, 08:16 AM
Nice.

That thing needs a BBC.
ramairetransam
05-12-2012, 08:44 AM
thats wicked tq
littlefranks
05-12-2012, 11:08 AM
stock bottom ls3.lsa heads.texas speed nos cam.stock ls3 intake 90 mm tb.
littlefranks
05-12-2012, 11:14 AM
here is vid at countyline on motor.cant wait to spray it .went 6.94 at 99.1 mph on motor.
http://youtu.be/osXsK9H6En4
littlefranks
05-12-2012, 11:14 AM
Nice.

That thing needs a BBC.

we put the bbc in mikes firebird.almost ready to hit the track lol
Erik@Lashway
05-12-2012, 02:27 PM
NIce Franky
Count of Monte Crlo
05-14-2012, 02:57 PM
thats nasty
speedtigger
05-14-2012, 03:11 PM
What does it weigh?
littlefranks
05-14-2012, 07:52 PM
What does it weigh?

3250.as per pbir.
speedtigger
05-15-2012, 10:17 AM
3250.as per pbir.

Gotta love G-Bodies for lightness.
firebird99
05-16-2012, 02:07 AM
That torque number has to be a typo 587 on motor alone with stock cubes...
itsslow98
05-16-2012, 02:13 AM
That torque number has to be a typo 587 on motor alone with stock cubes...

Yea that would mean he picked up less then 100rwtq on 175 shot.
+badss+
05-16-2012, 05:36 AM
Good luck at pbir tonight if rain can stay away.
3fingas
05-16-2012, 06:59 AM
3250.as per pbir.

LOL. With you sitt'n on a milk crate.
littlefranks
05-16-2012, 06:43 PM
LOL. With you sitt'n on a milk crate.

kirkey /milk crate same thing lol.
littlefranks
05-16-2012, 06:50 PM
That torque number has to be a typo 587 on motor alone with stock cubes...

376 is pritty big ci.cam choise is were its at.not off the self grind.just because you put a 175 hit in .dont mean you make 175 more .plus intake choise and flow makes a world of difference.if i put a vic jr il loose low end power but gain hp on top.i know what im doing trust me lol
;)
littlefranks
05-16-2012, 08:09 PM
View My Video (http://tinypic.com/r/2rqdopt/6)
Blackbird-WS6
05-16-2012, 08:15 PM
what RPMs you make that TQ at?
littlefranks
05-16-2012, 08:21 PM
354446
littlefranks
05-16-2012, 08:22 PM
this was motor pull View My Video (http://tinypic.com/r/653436/6)
firebird99
05-17-2012, 05:47 AM
376 is pritty big ci.cam choise is were its at.not off the self grind.just because you put a 175 hit in .dont mean you make 175 more .plus intake choise and flow makes a world of difference.if i put a vic jr il loose low end power but gain hp on top.i know what im doing trust me lol
;)
Well that may be true but I didn't say anything about your nitrous setup I said that torque number seemed to high for a all motor low horsepower setup I mean how many bolt on ls3's even with a cam put out almost 600lbs at the tire? I can't be the only one that feels that's off am I?
gator's 99TA
05-17-2012, 08:30 AM
Converter flash. Very common.

power on nitrous is dependant on so many factors. I have made 170 rwhp on a 150 shot when the tune was dead on.