SS10Tech
05-19-2012, 04:42 PM
Some people use the MAF or mass air flow, some use IAT or inlet air temperature, and some ask whether some are using one or the other for their build.
It seems there are different ways in going about a build that does not include a MAF? What combinations exist? Which are better for one build or another?
Cam help - 403 stroker, LS3 intake, 60#, L92 heads self polished, 1-7/8" LT's, T-56, 8.8" eaton posi.
238/240 .605/.609 112 LSA
239/242 .649/.609 112LSA
240/244 .605/.596 112 LSA
What is the purpose of installing a cam advanced a certain amount of degrees but cut on a tighter LSA versus buying a cam already ground on a wide LSA?
It seems there are different ways in going about a build that does not include a MAF? What combinations exist? Which are better for one build or another?
Cam help - 403 stroker, LS3 intake, 60#, L92 heads self polished, 1-7/8" LT's, T-56, 8.8" eaton posi.
238/240 .605/.609 112 LSA
239/242 .649/.609 112LSA
240/244 .605/.596 112 LSA
What is the purpose of installing a cam advanced a certain amount of degrees but cut on a tighter LSA versus buying a cam already ground on a wide LSA?