Stippy17
05-22-2012, 09:25 PM
First off I would like to make it clear this is my daily driver that sees street racing and 100ish 1/4 mile passes a year, and NOT a full blown racecar.
http://sphotos.xx.fbcdn.net/hphotos-ash3/527769_10150824536545963_536475962_9716304_2018298 221_n.jpg
Anyways last years #'s were 398whp/377wtq on a dynojet. My PB was 11.76 @ 114.8
Last Year's Combo:
227cc Stage II CNC Ported 59cc Patriot's
.581/.592 XER 224/230 Cam
LS6 Intake
Ported Stock Throttle Body
Stock Maf
SLP Lid
30lb SVO Injectors
1 3/4" Pacesetter's
TSP Ypipe
Corsa Catback
Built 4L65e
Yank 3600
Stock 10 Bolt 3.42s
Tuner - Ed Hutchings
Factory Fuel Pump
I'm hoping to go 11.4-5s this year, and then swap a 6spd in and strictly daily drive/street race the car as I will be building a drag car for the track. New #'s are 424whp/398wtq cutout open on a dynojet.
http://sphotos.xx.fbcdn.net/hphotos-prn1/550888_10150835994050963_536475962_9745615_7568555 4_n.jpg
This Year's Combo :
227cc Stage II CNC Ported 59cc Patriot's
.581/.592 XER 224/230 Cam
Fast 90 Intake (Unported)
Nick William's 92mm Throttle Body
85mm Truck Maf
98mm FTP Lid
ASP Underdrive Pulley
30lb SVO Injectors
1 7/8" TSP's
Custom 3'-4" Merge Ypipe
4" Cutout
3" Corsa Catback
Built 4L65e
Yank 3600
Stock 10 Bolt 3.42s
Tuner - Ed Hutchings
Racetronic Fuel Pump & Hotwire Kit
http://sphotos.xx.fbcdn.net/hphotos-ash3/560743_10150844857965963_536475962_9772789_5612943 02_n.jpg
I'm happy with the numbers especially for how mild my setup is.
http://sphotos.xx.fbcdn.net/hphotos-ash3/527769_10150824536545963_536475962_9716304_2018298 221_n.jpg
Anyways last years #'s were 398whp/377wtq on a dynojet. My PB was 11.76 @ 114.8
Last Year's Combo:
227cc Stage II CNC Ported 59cc Patriot's
.581/.592 XER 224/230 Cam
LS6 Intake
Ported Stock Throttle Body
Stock Maf
SLP Lid
30lb SVO Injectors
1 3/4" Pacesetter's
TSP Ypipe
Corsa Catback
Built 4L65e
Yank 3600
Stock 10 Bolt 3.42s
Tuner - Ed Hutchings
Factory Fuel Pump
I'm hoping to go 11.4-5s this year, and then swap a 6spd in and strictly daily drive/street race the car as I will be building a drag car for the track. New #'s are 424whp/398wtq cutout open on a dynojet.
http://sphotos.xx.fbcdn.net/hphotos-prn1/550888_10150835994050963_536475962_9745615_7568555 4_n.jpg
This Year's Combo :
227cc Stage II CNC Ported 59cc Patriot's
.581/.592 XER 224/230 Cam
Fast 90 Intake (Unported)
Nick William's 92mm Throttle Body
85mm Truck Maf
98mm FTP Lid
ASP Underdrive Pulley
30lb SVO Injectors
1 7/8" TSP's
Custom 3'-4" Merge Ypipe
4" Cutout
3" Corsa Catback
Built 4L65e
Yank 3600
Stock 10 Bolt 3.42s
Tuner - Ed Hutchings
Racetronic Fuel Pump & Hotwire Kit
http://sphotos.xx.fbcdn.net/hphotos-ash3/560743_10150844857965963_536475962_9772789_5612943 02_n.jpg
I'm happy with the numbers especially for how mild my setup is.