Generation IV External Engine - Horsepower question

Didnt really know where to put this thread but what is the cheapest and most effective way to increase horsepower. I have a 2000 z28. I already have a magnaflow exhaust amd a k and n air filter. I was thinking about a cold air intake. Any suggestions guys? Thanks!

This isn't the forum for you.

A simple air lid will meet or exceed all the gains a full on cold air intake could offer. Gears would offer the most bang for your buck and the biggest improvement you could get considering where your at now.

What kind of gears?

I like 410s for a M6 or 373s for an auto.

Didnt really know where to put this thread but what is the cheapest and most effective way to increase horsepower. I have a 2000 z28. I already have a magnaflow exhaust amd a k and n air filter. I was thinking about a cold air intake. Any suggestions guys? Thanks!

On a 2000, I'd do some non-emissions longtubes/Y to mate up to your exhast, a lid, an LS6 intake, and a matching tune for it all.

A simple air lid will meet or exceed all the gains a full on cold air intake could offer. Gears would offer the most bang for your buck and the biggest improvement you could get considering where your at now.

Gears are good and bad...if he does a lot of highway miles the stock 3.42 with an M6 are pretty good...if it's an auto without a 3.23 already then I'd change them too.

I like 410s for a M6 or 373s for an auto.

I agree with those choices if it's a weekend car and/or not on the highway a ton.