Cadillac CTS-V - What Can I put a ls6 engine and tranny in?

Well guys, I received an infraction from LS1Tech for trying to sell since I am a fairly new member and cannot post anything for sale yet, but I will have things on Ebay over the next month rather then through here.

However, since my car is totaled, is there anything I can put my LS6 engine and transmission in that would be pretty sweet? I am looking at 68 camaro for about 5500 with a blown engine that I think will work. But any other ideas out there?

Most RWD import platforms offer swap kits at this point.

Popular would be:
Mazda FC and FD RX7s
Nissan 240sx
Nissan 350Z
Nissan 300ZX
280Zs
Honda S2000s

And they offer lesser weight with the power of the LS6 can make a VERY good combination.

Hinson Super cars
Sikky

THose two sites will offer a LOT of info.

Porsche 996

Honda s2000

Id do a 240sx or a Datsun 280z

Or a rail buggy..

tooo bad you're not near the desert
http://www.youtube.com/watch?v=9axr3JLZjNQ&feature=related

Thats the beauty of it... ANYTHING!!!!! Id do a pro touring 68 like your talking about but its whatever you can dream of ls swaps are the most swaped engines and if you can think it its been done

I was going to rebuild my LS2 and slap it in this. It's my '76 Datsun 280Z.

http://i1125.photobucket.com/albums/l586/bruckde/434282bd.jpg

I love the 280z's! Bad ass little cars and rare u see them in good shape anymore. An LS6 swap in one of those would be tits!

miata= minivette

I was going to rebuild my LS2 and slap it in this. It's my '76 Datsun 280Z.

http://i1125.photobucket.com/albums/l586/bruckde/434282bd.jpg

That's badass!!

Jaguar XJS8.
That what i would do.

http://www.jaguarspecialties.com/v8_kit.asp

http://i231.photobucket.com/albums/ee230/ALR1504/Jag-LS%20Pics/XJ6-S3-LS1.jpg

http://www.e-carpictures.com/wp-content/uploads/2011/11/1985-Jaguar-XJS-Green-Coupe-Car-Photo-1.jpg

i say do the 68 camaro, that shit will be bitching, but i would also give the heart plan to a rx7, thats the only car that has smoke me, a rx7 gutted with a build ls1 and t56 trany, sum bitch was fast!.

http://www.youtube.com/watch?v=DudjNvnsfKE

LS engine, drivetrain, corvette chassis... with a civic body dropped on top of it to cloak it up. LOL

S2000's have a swap kit available?

S2000's have a swap kit available?

v8s2000.com

I do like the Datsun idea... but that thing is pretty small for me! I am 6'2! So far still sticking with camaro but some bum just bought it! So I have to find another one!

Most RWD import platforms offer swap kits at this point.

Popular would be:
Mazda FC and FD RX7s
Nissan 240sx
Nissan 350Z
Nissan 300ZX
280Zs
Honda S2000s

And they offer lesser weight with the power of the LS6 can make a VERY good combination.

Hinson Super cars
Sikky

THose two sites will offer a LOT of info.

FD RX7 :hail:
240SX :cool:

THIS:

miata= minivette

Then do this:

http://www.youtube.com/watch?v=HM5pW7EC8U8


http://www.youtube.com/watch?feature=endscreen&v=ddDcZ-LDRyI&NR=1

-meaty

rx-8... but everything else mentioned is pretty cool to build

Look for a blown up Vette.

http://www.aptuned.com/blog/1968-camaro-with-supercharged-lsa-cts-v-engine.html

this would be the sweetest car ever to have.

http://www.aptuned.com/blog/1968-camaro-with-supercharged-lsa-cts-v-engine.html

this would be the sweetest car ever to have.

Ya, that would be sweet, I just need to find a 68 camaro with no engine! I have never done any body work, so trying to find one with a decent frame and no rust, which is proving to be difficult... and of course one I can afford!

Come down to GA, there are several 1st gen camaro shells waiting for the finishing touches on craigslist.

However, since my car is totaled, is there anything I can put my LS6 engine and transmission in that would be pretty sweet?

Pontiac Solstice or Saturn Sky...... lots of documentation on this swap and the V1 accessory drive and transmission will work just fine. I believe that GM even published a list of the parts needed for the swap.

Car will weight ~3000 (a touch less than a C6 Z06). :D

Mallett did/maybe still does these swaps.

Rx7, 1st gen Camaro, anymof the imports listed earlier or even an old fox body coupe. Got it down to 26-2700 lbs with a nice h/c/I and a shot on it. Thing would be nasty fast

You can easily put it in a 240sx... It was what I built before I bought the V1.

http://farm7.static.flickr.com/6210/6066746317_651876060b_z.jpg

http://farm7.static.flickr.com/6132/6012454648_d89140d70f_z.jpg

http://i237.photobucket.com/albums/ff254/tmonttt/2011-04-04154849.jpg

http://farm7.staticflickr.com/6050/6320359254_95463d91d3_b.jpg


http://www.youtube.com/watch?feature=player_embedded&v=ci8UablmiFk