Carbureted LSX forum - ***************FOR SALE*************** (Carbed applications)

This is a sticky is dedicated for FOR SALE items for carbed applications:

RULES

1: For carbed components only

2: Please keep you post updated

3: Once your item is sold or removed from the market delete or have the post deleted

4: Try to consolidate, if you add new items, attempt to keep it in a earlier post YOU previously made

5: Posts older than 90 days will be removed. Feel free to replace a old, deleted post with a fresh one.(This will prevent me waiting on PMs that some members miss or just do not get on tech that often)

Pretty simple, it can be a HUGE mess of pages of unneeded material, so i will stay on top of it, AFTER 30 DAY i will begin to look into removing the posting after i attempt a PM contact to ensure the item is still FS, this will also cut back on randoms that only want to sell parts and not be a active LS1 tech member.

The same rules apply in here for selling carbed parts! If you lack the 6 months or 50 legitimate posts, i will immediately delete the posting!

I will do so to prevent fraudulent attempts to rip off members.


PM any suggestions to the rules that may contribute to our carbed LS experience of buying and selling.

Alright, selling my custom belt drive for a LS, it is perfect, adjustable, for no power steering like i had in the 89. It will come with the belt and alternator. For truck balancer.

150 local, 165$ shipped to the lower 48.

http://i157.photobucket.com/albums/t74/ZONES89RS/8eec48c2.jpg

LS2 out of a 2008 trail blazer ss 58x ( all aluminum ) 48,000 miles, has a new f body oil pan, pickup tube and windage tray installed has new 2'' setback swap plates installed, msd 6012 box and a edelbrock performer rpm 71187 dual plane lsx intake both are brand new never installed and were purchased from sk speed, truck accessories minus a/c pump. complete from oil pan to intake add a carb and your running $3,800. really hate to sell but times are tight for me right now. pm if interested

Selling my Prosystems 4150 Carb that was built for E85 by ProSystems. It is a 1000HP main body and I've got the complete build sheet. This carb is ready to run as I just took it apart and cleaned everything. I store it with the bowls dry when I'm not racing.

This was on my 418 LS3 and I'm looking to step up to a gas Dominator or SV1 (Open to trades plus or minus cash for the right carb).

Currently the carb has no power valves installed and is square jetted with 101 jets. It has billet metering blocks, jet extensions, adjustable air bleeds, and all that other stuff ProSystems is known for installing. On my engine it made just over 700hp on the dyno OUT OF THE BOX.


Price: $550 OBO or trade for the right carb SOLD

Thanks,
Sean

Looking for a Cathedral port Super Victor if anyone has one for sale (New EFI or Carb)

Wtb. Performer rpm intake and msd setup. Dont need a carb. $400

Msd 6012 box and harness. Has all connectors, not hacked up. Was in a race car and now going with a distributor set up. $300 shipped!

RHS Tall Deck Block, Lunati 4.250 Pro Series Crank, GRP Aluminum Rods, Diamond Custom Pistons, Total Seal Rings, Clevite Bearings, Mast LS7 Heads, Titanium Intake & Stainless Exhaust Valves, Crane Solid Roller Lifters, Custom cam, T&D Shaft Rockers, Cometic Head Gaskets, ARP Head Studs, ARE Dry Sump Oil Pan, Mast CNC Ported Intake, Jesel Belt Drive and Distributer, Custom Billet Valve Covers, Set up for Nitrous, Brand New Build still wrapped up, going in a different direction and need to sell for new Build. Cost $26,000 to Build, Shawn Miller @ Virginia Speed did all machine work and assembly, have all receipts and build sheet. Will sell for $22,000 possibly cash and trade

cgz648@hotmail.com

new victor jr. and msd 6010 box 550+ shipping

still have 6012 box and harness. price drop to 260 obo

Ls1 Vic jr kit with edelbrock box, harness, and performer 750 carb. Ran for 15 minutes on dyno. Asking $800 plus shipping.

Ls3 intake, Injector bosses removed, Painted black. Never used. With gaskets and bolts. $300 shipped

http://i139.photobucket.com/albums/q315/1badeagle/2013-01-30_09-46-49_626.jpg

Any questions feel free to pm me or call/text anytime 740-819-7601

Well, long story short, I just dont have time for this car, havent touched it in forever, no desire to do it, and pending a new job, I wont have time for it at all for awhile. Ill be parting it all out, Motor and Transmission will try to go together. Afco coil overs, brand new. Aluminum radiator, 9inch rear end with mark williams axles. ladder bar suspension, fiberglass fenders and hood for 2nd gen camaro.

BUYER WILL PAY SHIPPING!!!!!


Motor - LS2 block, crank and timing chain. LS3 rods with ARP rod bolts, Mahle pistons for LS2, valve reliefs opened up for LS3 Heads. ARP head studs. LS3 heads dual valve springs for 650 lift, LS3 rockers with comp trunion, howards cams pushrods. LG G6X3 cam on a 109 LSA for carb set up. F body oil pain and pick up. Mellings Oil pump. Have build sheet from very reputable builder. ICS in the North Hills.
Asking $4,500.00 OBO
http://i118.photobucket.com/albums/o114/382blackSS/70/IMG_20120819_170543.jpg
http://i118.photobucket.com/albums/o114/382blackSS/70/IMG_20120819_171016.jpg

Tranny - TCI TH400, has 50ish runs on it, has trans brake. RV casing. 4400 stall built by Ultimate converters to fit a LS. Hughes SFI approved and rated flex plate, ARP bolts.
http://i118.photobucket.com/albums/o114/382blackSS/70/0715121129.jpg
http://i118.photobucket.com/albums/o114/382blackSS/70/0717121714.jpg
Asking $1,500.00 OBO

Would like to see motor and tranny go together.
Asking $5,750.00 OBO

Aluminum radiator, will post specs in the next few days.
http://i118.photobucket.com/albums/o114/382blackSS/0501122037.jpg
Asking - $200.00 OBO

Afco Racing Coil Overs - 3850F BNC, Double adjustable, with coilover kit, 400lbs springs. 5inch stroke. Installed on car, wheels never touched the ground.
http://i118.photobucket.com/albums/o114/382blackSS/70/0626121637.jpg
Asking $800.00 OBO

More will be posted

I'm selling my Pro-systems built 780 carb. It was setup for a road race car. So anyone looking to road race or auto cross this is what you're looking for. Will even work great on a street car. It sat on a stock 2004+ LS6 and made 380 at the wheels with a Vic Jr intake. I'll be selling the carb and all assorted jets and trinkets I may have for it. I have two Jegs jet sets, 10.5 power valve, bunch of air bleeds and assorted gaskets. Most are still in the packaging. I still have the build sheet from pro-systems as well. Though all the jets and power valves have been changed since then. Less than 5 hours of run time.

I'm located in Norfolk, Va. Will ship at buyers cost. E-mail is the best way to get ahold of me kmspruill242 at yahoo dot com. Or if you'd like to text, 757-80five-zero232.

Asking 500$ (build sheet shows 667$ new) Make me an offer...

Thanks
Kyle



Edit: Mallory EFI to Carb bypass fuel pressure regulator. Worked great on my 4th gen. Held a solid 6 psi regulating down a racetronix pump. 50$ plus shipping.

MSD 6010 still in box unused, $310 shipped,i have a pic but it wont upload for some reason

Selling my BRAND NEW, UNUSED NOS Cheater Dual Shot System for $600 SHIPPED. Was going to use it but change of plans. Thinking about going Turbo instead. I opened it up and started putting the plate and noids together but stopped right there. Really want to go Turbo now. I have pics in my phone but cant upload them, PM your cell or email and I will get the pics to you. When i leave gym tonight, i will try to upload the pics with my laptop.

Thanks
B

I have a "like new" Holley street avenger 780cfm. It has about 10 miles one it. I was there when it came out of the box brand new. Owner put it on his truck, drove the truck around our small town a couple times...then sold me the truck. Make me an offer. Open to trades(Double pumper carb - 850+cfm) . Will post pics soon.

The. Carb came off 396ci motor its been sitting for a while.also have a velocity top hat.asking
$420 shipped with fees included.
http://i58.photobucket.com/albums/g254/look9sec/20130314_173638.jpg

http://i58.photobucket.com/albums/g254/look9sec/20130312_134450.jpg

BNIB EFI Super Victor you can plug the holes and use it for a carb and is cheaper than the Carb version by far PLUS getting it for 350 shipped!!!

BNIB Super Victor For sale!

Selling my BRAND NEW, UNUSED NOS Cheater Dual Shot System for $480 SHIPPED. Was going to use it but change of plans. I opened it up and started putting the plate and noids together but stopped right there. Paypal gift as thats what I use for shipping..Ask other members here, I always use 2 day FedEx shipping or sometimes overnight shipping.

The. Carb came off 396ci motor its been sitting for a while.also have a velocity top hat.asking
$420 shipped with fees included.
http://i58.photobucket.com/albums/g254/look9sec/20130314_173638.jpg

http://i58.photobucket.com/albums/g254/look9sec/20130312_134450.jpg

would you sell the hat by iself? if so how much?
would you be interested ina trade for this?

http://i1262.photobucket.com/albums/ii606/mr305911/Mobile%20Uploads/2013-03-119522-31-4495689_zps395ca631.jpg

http://i1262.photobucket.com/albums/ii606/mr305911/Mobile%20Uploads/2013-03-119522-31-2195568_zps5b51f4e5.jpg

http://i1262.photobucket.com/albums/ii606/mr305911/Mobile%20Uploads/2013-03-119522-30-5795821_zps29dfbea6.jpg

WTB MSD 6010 24x box. used or new but working

I 2nd the MSD 6010 box

Selling my CSU carb I never got to use, sold off my turbo car and didnt complete the carb conversion. Has all the bells and whistles for a blow thru, dual needle and seat, 8an fitting on each bowl, billet base. This carb was used for some light tuning by the previous owner then removed. Carb is very clean, ready to bolt on. $1600+ new from CSU, need to get $1200 out of it.

Anybody wants to trade a Vic Jr intake for dual plane??? I have a dual plane and was thinking about going with a Vic Jr for spray!!

I need a GMPP dual plane L92 intake. I have a vic jr L92 intake for trade or sale.

wtb msd 6010 and harness

$ SOLD
http://ls1tech.com/forums/parts-classifieds/1640870-fast-wideband-single-sensor.html

I have a under 100 mile performer dual plane for cathedral port heads. I want a Vic jr for nitrous. I know some time ago there were guys looking to swap, I am ready to do so now. Pm me. Thanks.

I'd offer cash if I had it. The Vic I was gonna trade I ended up using on the stang.

L92 victor Jr. Brand new, and make reasonable offer.

L92 victor Jr. Brand new, and make reasonable offer.

Pmed ya

wtb msd 6010 24x box. Used or new but working

bump:p

I purchased Trick Flow As Cast heads milled to 62 cc with push rods, gaskets, and arp bolts from vengance racing for $2078 and had a custom cam from eps made specially for these heads and a victor jr manifold for $445. I was told it will make a ton of torque and make about 470-480 rwhp. cam specs are 235/246 on a 108.

Asking $2300 for everything shipped. I will sell heads and cam separately if asked.


I was going to do install this spring but I have my first baby on the way and the car and parts have to go.

1975 stingray with 2002 ls1 - trex cam, full bolt ons, only 46k miles on motor. $14,000 OBO. Pictures in my profile!

Note if you want the car with the new heads and cam installed with tune I can do that for $16,500.

WTB/WTT MSD 6010 24X BOX
Have CC 228/228 .588/.588 116 LS1 3bolt Cam for trade

I have a sweet C&S blow thru carb and Aeromotive A2000 regulator. Setup made 1350 at 30lb on a procharged 406 sbc. Car went consistant 8.20's. Had 4 way needle and seat bowls with adj power valve setup. Carb alone was over 1400. $1000 shipped on both. This will make big power on the street. Will trade for victor jr efi l92/ls3 intake setup. Thanks Can email pics, sorry wont load.

The. Carb came off 396ci motor its been sitting for a while.also have a velocity top hat.asking
$420 shipped with fees included.
http://i58.photobucket.com/albums/g254/look9sec/20130314_173638.jpg

http://i58.photobucket.com/albums/g254/look9sec/20130312_134450.jpg

I still have the carburetor $200 shipped