A little help Please
#1
Teching In
Thread Starter
Join Date: Oct 2011
Location: Taunton, Somerset, UK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
A little help Please
Hi Guys,
I am trying to do some research into swapping out the motor on my Lexus GS300 (Mark 2) which is currently a 3.0 na straight 6 and installing an LS series engine. I am trying to find out if a company in the states is still in business - DGR Fabrication i think they operate from San Jose ca.
Thanks in Advance
I am trying to do some research into swapping out the motor on my Lexus GS300 (Mark 2) which is currently a 3.0 na straight 6 and installing an LS series engine. I am trying to find out if a company in the states is still in business - DGR Fabrication i think they operate from San Jose ca.
Thanks in Advance
#2
TECH Junkie
iTrader: (1)
Sorry, on this one, it states that the company is permanently closed.
Maybe someone else knows differently?
http://local.yahoo.com/info-37492333...San+Jose%2C+CA
Maybe someone else knows differently?
http://local.yahoo.com/info-37492333...San+Jose%2C+CA
Last edited by gMAG; 06-09-2012 at 08:46 PM.
#4
TECH Junkie
iTrader: (1)
Here's a possibility...
http://www.clublexus.com/forums/gs-s...available.html
^^^Although this particular thread has been closed, you might try registering on this forum, them PM one or more of the posters in this thread.
You never know...one of them could be able to put you in touch with the (former) owner.
Best of luck!
http://www.clublexus.com/forums/gs-s...available.html
^^^Although this particular thread has been closed, you might try registering on this forum, them PM one or more of the posters in this thread.
You never know...one of them could be able to put you in touch with the (former) owner.
Best of luck!
#5
TECH Junkie
iTrader: (1)
OK!
Now we're making progress!!
Try this...
http://www.ebay.com/sch/i.html?_nkw=...ates&_osacat=0
Super expensive, but beats trying to fab something, I think.
Maybe the US dollar will tank before the Euro, then you'll get a deal. lol
Now we're making progress!!
Try this...
http://www.ebay.com/sch/i.html?_nkw=...ates&_osacat=0
Super expensive, but beats trying to fab something, I think.
Maybe the US dollar will tank before the Euro, then you'll get a deal. lol
#6
Teching In
Thread Starter
Join Date: Oct 2011
Location: Taunton, Somerset, UK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Wow - how did i miss those ?!?! Thankyou very much, DGR's Aluminum mounts were $1500 so this is better (well cheaper lol) thank you again now just to get shipping quote to the uk