Stereo & Electronics - cant figure this one out
06-14-2012, 12:46 PM
Hope this is the place to ask but here goes. Had my dash apart and noticed I had an old car alarm on it that didn't work anymore to I pulled it out along with all the wires. Now my electric door locks don't work. I was pretty careful when i pulled all the stuff out. Any ideas??
06-14-2012, 04:58 PM
it may have been integrated into your locks. maybe just need to find the wires and hook them back up
06-15-2012, 07:35 AM
I was really really careful Wun I pulled it out. Made sure not to cut any wires or anything. I pretty much just unclipped everything from the boxes and pulled the wires. There was one left tho that I couldn't find out where they went , maybe I.to the door somplace . I didn't cut them tho there just UN plegged from the unit under the dash on the drivers side
06-15-2012, 09:01 AM
Gee, I had working locks and then I pulled out an alarm system (with keyless entry) and my locks don't work anymore. But that must be a coincidence because I was really careful pulling the alarm wires - the lock problem couldn't possibly be related to the wires I disconnected. :bang:
Go back and check your door lock wiring connections... especially the orange with black and red with black wires going to the BCM.
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO