General Maintenance & Repairs - How hard is it to remove the instrument gauge cluster in a 2000 trans am ws6?




eb2phkingood
06-25-2012, 06:07 AM
I am needing to remove my instrument gauge cluster on my 2000 pontiac trans am ws6. My questions are:

1) are there any tutorials anywhere of how to do this?

2) approximately how much time will it take to disassemble it all?

3) has anyone on here done this before and if so would you be ok with me PM you?


Thanks!


_JB_
06-25-2012, 06:13 AM
The shroud is held in by like 6 clips. Just pull it off, and you'll figure out the rest.

eb2phkingood
06-25-2012, 05:11 PM
The shroud is held in by like 6 clips. Just pull it off, and you'll figure out the rest.

thanks... I am sure I will figure it out. Does anyone happen to know the approximate time I'll probably be looking at on tearing down, replacing, and putting it all back together? Thanks!


BIG_MIKE2005
06-25-2012, 05:41 PM
about 15 minutes unless your highly un-mechanically inclined.

LS6427
06-25-2012, 07:29 PM
Very very easy.....but be very careful not to let the metal clips scratch the clear face of the cluster.

.