View Full Version : Help me pick my wheels!


qwik3r
04-01-2004, 11:28 AM
Ok guys i have narrowed it down to 2 reasonably priced high polished aluminum wheels. I don't quite know the lip sizing yet but i do know it has a deep rolled lip, they have to get back to me regarding offset etc. Let me know what you think. Which one!? These would be going on my 02 t/a btw. Pics at http://www.cardomain.com/id/qwiktends

Pentia:
http://www.introwheels.com/images/pg_w_exposed/exposed_275/pentia_275.jpg

GT Sport. Rivits are optional:
http://www.introwheels.com/images/pg_w_exposed/exposed_275/gt_sport_275.jpg

slow
04-01-2004, 11:40 AM
gt sports, they look similar to the HRE 545's that i love.

Ryan

hondakiller
04-01-2004, 01:43 PM
i like the gt sports, and get the rivets :D .

Bad Blu Formula
04-01-2004, 02:48 PM
GT Sports with rivets

2_wacko
04-01-2004, 03:00 PM
GT Sports

Redlinez
04-01-2004, 05:14 PM
How much are those GT's?

qwik3r
04-01-2004, 05:51 PM
Yeah i am definitly leaning towards the GT sports, i THINK these are them on this early SS probably 15's or 16's because they don't look too big. I will probably be going with a 17/18 combo and that is 1750 plus s/h and tax if u live in CA. If you want the rivits its an aditional 150.00 apparently. Looking at 2000 shipped probably i didn't inquire about s/h prices. Plus than i am gonna need 2 new tires, probably 315's so thats another 600 or so. Yikes almost 3 grand already.

http://www.introwheels.com/showroom/pg_showroom/chevy_cars/SS_Camaro.jpg

Sheomet
04-01-2004, 06:10 PM
GT Sports

02WS6Bird
04-01-2004, 06:30 PM
GT Sports

Mike 01WS6
04-03-2004, 02:35 AM
Who makes the GT Sports?

Mike 01WS6
04-03-2004, 02:58 AM
Well, I did some research and found out that they were made by I-Forged. But I don't see any 17x11 sizes!! or 17x9's!! WTF! They look so damn nice and they don't come in that common combo???!!

qwik3r
04-03-2004, 03:13 PM
Your research is wrong they are not made by iforged they are made by introwheels....

RealDealCamSS
04-03-2004, 04:54 PM
Pentias IMO. Those GT's flat 5-spoke design is just boring to me - especially for a curvy T/A.

01 Red WS6
04-03-2004, 05:13 PM
I vote for the GT Sports

alexWS6
04-03-2004, 07:04 PM
Your research is wrong they are not made by iforged they are made by introwheels....

this just in: introwheels owns iforged

5POINT7
04-03-2004, 09:17 PM
this just in: introwheels owns iforged
:owned:

qwik3r
04-04-2004, 01:01 AM
well they are not known as the "iforged" wheels, nor is the company. They are from the www.introwheels.com website and use that name...

BAD ASS TA WS6
04-04-2004, 01:50 PM
They are still the same damn company. Intro wheels usually go for a good bit less since they are not multipiece wheels.

Danny2tek
04-04-2004, 03:53 PM
GT's !

IntroWheels
04-06-2004, 03:39 PM
Our wheels are 2-piece wheels, whereas iForged has 2-piece and 3-piece wheels. Intro and iForged are seperately owned, but iForged is located in our building and we build 100% of the wheels that they sell.

black_z
04-06-2004, 07:43 PM
You should sponsor this board. :D Look at the amount of exposure you would be getting. \/\/\/

http://www.ls1tech.com/forums/showthread.php?t=157869

qwik3r
04-06-2004, 09:36 PM
guess i was write afterall, iforged does not own introwheels. I think you guys should have a group purchase since so many love the iforged look and your wheels are at a fraction of the cost.

IntroWheels
04-07-2004, 06:16 PM
Ya, I sell Intro and iForged wheels. It really just depends on what you like for your car. To each his/her own.