Dynamometer Results & Comparisons - Vengeance Built-600 RWHP Stage III Performance Package for C6 Z06 Pics/Dyno/Idle Clip

We appreciate the service provided to our country by all branches of military. So, when we get a chance to provide a Command Sergeant Major with 600 horses under his right foot, WE JUMP ON IT! Our customer's 2006 C6 Z06 has received our Stage III Performance Package for the LS7. Check out the details below!

Stage I Performance Package for C6 Z06
Callaway Honker OR Vararam cold air induction kit
American Racing 1 7/8" Stainless LT headers w/ 3" high flow catted X-pipe
180* Thermostat
Vengeance Racing ported/ polished throttle body

Stage II (Requires Stage I listed above)
Vengeance Racing Custom Spec Camshaft
Vengeance Racing Dual Spring Kit w/ Ti retainers
3/8” Hardened pushrods
Comp Trunion upgrade kit
Katech C5R timing chain

Stage III (Requires Stages I and II listed above)
All required GM gaskets and ARP bolts
Fully CNC'd LS7 Cylinder Heads (exchange)
GM MLS Head Gaskets
ARP LS7 Head Bolts
Comp Hi Performance Lifters

We also added an RPS Carbon Twin Clutch Kit to support the additional horsepower.

Before and After
http://i1107.photobucket.com/albums/h389/KEVINatVENGEANCE/Untitled-3.jpg
http://youtu.be/eGFmgP9XTIE
http://i1107.photobucket.com/albums/h389/KEVINatVENGEANCE/IMG_5960.jpg
http://i1107.photobucket.com/albums/h389/KEVINatVENGEANCE/Untitled-1.jpg
http://i1107.photobucket.com/albums/h389/KEVINatVENGEANCE/IMG_5950.jpg
http://i1107.photobucket.com/albums/h389/KEVINatVENGEANCE/IMG_5952.jpg
http://i1107.photobucket.com/albums/h389/KEVINatVENGEANCE/IMG_5967.jpg
http://i1107.photobucket.com/albums/h389/KEVINatVENGEANCE/IMG_5968.jpg

Great numbers and work guys .
Car sounds amazing and now very aggressive too..

What catback is that?

Is this setup running 93 octane?

Looks like he will need to buy some sticky tires next :)

Hats off on 600rwhp and more importantly 550rwtq+ on a stock shortblock. crazy!

All these 600+ rwhp LS7 setups make me wonder why mine isn't over 600 as well...

Nice numbers. Whats idle set at?I have a erl 427 in my 10 Camaro. What would it cost for the heads and cam? I have the supporting mods. No heads to exchange though.

Thanx guys!!!! Idle is set at 900rpm.. 93 octane...

delphigto, feel free to give us a call to discuss your specific combo sir.

All these 600+ rwhp LS7 setups make me wonder why mine isn't over 600 as well...

I dont know your set up but corvettes have less drivetrain loss than an F-bodys do. 550 rwtq is impressive for a stock shortblock hydraulic cam LS7 though.