LT1-LT4 Modifications 1993-97 Gen II Small Block V8

my 95 z28 feels like it is misfiring

Thread Tools
 
Search this Thread
 
Old 06-29-2012, 11:50 AM
  #1  
Teching In
Thread Starter
 
m1995's Avatar
 
Join Date: May 2012
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default my 95 z28 feels like it is misfiring

i have a 95 z28 i just put a new ignition control module in and it feels like it is misfiring it did this before I put the new one in. it only does it when i really push the gas hard. what could cause this? my oil pressure also runs at about 20psi which seems low.
Old 06-29-2012, 03:46 PM
  #2  
Teching In
Thread Starter
 
m1995's Avatar
 
Join Date: May 2012
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default the light went off

and now it is starting hard and having trouble running it flashed the cel for a minute and then
Old 06-30-2012, 05:40 AM
  #3  
TECH Fanatic
iTrader: (1)
 
nascarnate326's Avatar
 
Join Date: Sep 2009
Location: Michigan
Posts: 1,574
Likes: 0
Received 1 Like on 1 Post
Default

Plugs, wires, MAF, and optispark.

Id try those first.
Old 06-30-2012, 09:44 AM
  #4  
TECH Enthusiast
 
ZFreie's Avatar
 
Join Date: Aug 2010
Location: New Hampshire
Posts: 543
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by nascarnate326
Plugs, wires, check fuel pressure.

Id try those first.
Leave the damn opti alone until you rule out the cheap and easy options.



Quick Reply: my 95 z28 feels like it is misfiring



All times are GMT -5. The time now is 02:05 AM.