Street Racing & Kill Stories - 500hp mirage vs 600hp s2000




View Full Version : 500hp mirage vs 600hp s2000


bastard dsm
06-29-2012, 07:44 PM
well hadnt posted here in a while but here is a freindly race between me and a coworkers s2k. you sould remember him from this vid
http://www.youtube.com/watch?v=lMPoOp2Ppek&feature=g-all-u
these were 40 and 60rolls and we are both on m/t radials.

http://www.youtube.com/watch?v=9SyFrUtKm-o&feature=plcp

http://www.youtube.com/watch?v=HfN9ut3p6UY&feature=plcp

http://www.youtube.com/watch?v=_Nixpu_CbNE&feature=plcp

we are both at 24psi, s2k needs a trans for sure


2SSARME
06-29-2012, 08:00 PM
wow...

CruseMissle
06-29-2012, 08:56 PM
That mirage is a nasty sleeper. Both cars roll out for sure


2StepsAhead
06-30-2012, 08:38 AM
Love when people build colts and mirages...so light and sleeper.

bad67ls
06-30-2012, 10:04 AM
slowest supposed 600 hp anythings ive ever seen, and all cars need driver mods or automatics put in. you all shift like pussies!

bastard dsm
06-30-2012, 10:24 AM
Sure, if you say so...guess reading isnt your strong point.

6PntHo
06-30-2012, 11:33 AM
Damn both cars are fast.. Sleeper mirage.. Good stuff

liqidvenom
07-01-2012, 02:10 PM
Sure, if you say so...guess reading isnt your strong point.

dont mind him...thats a nasty quick car you got there

adamantium
07-01-2012, 02:23 PM
slowest supposed 600 hp anythings ive ever seen, and all cars need driver mods or automatics put in. you all shift like pussies!

If thats slow then its safe to say that camaro of yours is slow aswell.


Turbo s2k's are sick, its very common for them to make 600+ on stock motor.

http://www.youtube.com/watch?v=cxOLCybSvIE&feature=plcp

bad67ls
07-01-2012, 03:51 PM
yep its slow. come find out. and bring your moms purse.

07 z71 silverado
07-01-2012, 04:14 PM
yep its slow. come find out. and bring your moms purse.

your so fail

adamantium
07-01-2012, 04:52 PM
yep its slow. come find out. and bring your moms purse.

No need to find out. There are plenty of S2000's that'll give you the bus from whatever race you want, that are out of your league. Besides that you haven't brought anything to the table, when was the last time you put a beating on a 700whp F-body from a roll?

Sweet_SS
07-02-2012, 09:37 AM
yep its slow. come find out. and bring your moms purse.

Its too bad I still don't have my Talon. I would have loved to whoop your a$$. Oh when I sold it, I was on 38psi from 36psi and more timing. The car was around 700AWHP....get some!!!!

http://youtu.be/fnl20L-sEq0

adamantium
07-02-2012, 01:45 PM
Its too bad I still don't have my Talon. I would have loved to whoop your a$$. Oh when I sold it, I was on 38psi from 36psi and more timing. The car was around 700AWHP....get some!!!!

http://youtu.be/fnl20L-sEq0

wow thats badass, theres a local dude who has one that made 750awhp thing has like no paint sleeper as hell lol he's throwing an auto in it and basically going to decimate everything from the dig on the street.

http://www.youtube.com/watch?v=g9q1DoUxOyI

marc97taws6
07-02-2012, 01:58 PM
The S2000, the one newer Honda I'm sure all of us wouldn't mind owning

BBAP2
07-02-2012, 02:04 PM
Its too bad I still don't have my Talon. I would have loved to whoop your a$$. Oh when I sold it, I was on 38psi from 36psi and more timing. The car was around 700AWHP....get some!!!!

http://youtu.be/fnl20L-sEq0

Understood and agreed. However, DSM's are pretty much cheap and ugly as ISH right next to any year camaro. Anyone can make a dsm fast. They are so cheap and have such an issue with crank walk. Let me ask you, why don't you still have your cheap @ss DSM? Let's weld our tranny's everybody lol.

How can i put this lightly...

Your built whatever DSM will last maybe a couple months if that lol.

An s2k with proper build will hold up with 500+hp A LOT LONGER than any DSM (forged internals). Bank on it. Don't question me either..My closest buds with DSM's run the fastest times over here from ROAD RACE in Whittier, CA. They don't last very long which is why every owner moves on just like yourself lol. 38PSI?? WTF? That is small time power with that much boost. WOW.

Man... A DSM looks so fugly sitting next to an s2k.

The fastest drag s2k is sitting @ 7.5 @ 180something in th 1320. It didn't need awd to reach that (NOR sheperds racing anything lol) all while looking and sitting much prettier than a dsm lmao. Not to mention the recent broken record for a stock block s2k just reached 800 rwhp...

http://www.s2ki.com/s2000/topic/950127-800hp-stock-block-s2000/


Let's not get too boastfull about your crappy DSM.

Ergonomics, appearance, engineering, reliablility is something I need to be satisfied with before creating any kind of proj car....

Sweet_SS
07-02-2012, 02:32 PM
wow thats badass, theres a local dude who has one that made 750awhp thing has like no paint sleeper as hell lol he's throwing an auto in it and basically going to decimate everything from the dig on the street.

http://www.youtube.com/watch?v=g9q1DoUxOyI

Thanks for the compliment and sharing that vid. That DSM sure does move:D

Sweet_SS
07-02-2012, 02:36 PM
Understood and agreed. However, DSM's are pretty much cheap and ugly as ISH right next to any year camaro. Anyone can make a dsm fast. They are so cheap and have such an issue with crank walk. Let me ask you, why don't you still have your cheap @ss DSM? Let's weld our tranny's everybody lol.

How can i put this lightly...

Your built whatever DSM will last maybe a couple months if that lol.

An s2k with proper build will hold up with 500+hp A LOT LONGER than any DSM (forged internals). Bank on it. Don't question me either..My closest buds with DSM's run the fastest times over here from ROAD RACE in Whittier, CA. They don't last very long which is why every owner moves on just like yourself lol. 38PSI?? WTF? That is small time power with that much boost. WOW.

Man... A DSM looks so fugly sitting next to an s2k.

The fastest drag s2k is sitting @ 7.5 @ 180something in th 1320. It didn't need awd to reach that (NOR sheperds racing anything lol) all while looking and sitting much prettier than a dsm lmao. Not to mention the recent broken record for a stock block s2k just reached 800 rwhp...

http://www.s2ki.com/s2000/topic/950127-800hp-stock-block-s2000/


Let's not get too boastfull about your crappy DSM.

I always found it funny whooping on guys like you. Especially when you felt so superior than me :eyes: I do agree with you on one thing. Parts are cheap, but it's not easy making one of these fast. It does take some time, $$$ and elbow grease, but kicking the crap out of the competition was priceless. As far as why I sold it goes :bang: I've always wanted to build a V8...try something different and see how the other side lives. My motor in another DSM ran 9.1 over 150mph :nod:

Looks good to me, but your mug is probably uglier than the hair on my ass LOL

http://i50.tinypic.com/110953n.jpg

BBAP2
07-02-2012, 02:41 PM
I always found it funny whooping on guys like you. Especially when you felt so superior than me :eyes: I do agree with you on one thing. Parts are cheap, but it's not easy making one of these fast. It does take some time, $$$ and elbow grease, but kicking the crap out of the competition was priceless. As far as why I sold it goes :bang: I've always wanted to build a V8...try something different and see how the other side lives. My motor in another DSM ran 9.1 over 150mph :nod:

Your mug is probably uglier than the hair on my ass LOL


You are the pee wee here who got defensive by someone just simply showing some vid. Be honest with yourself..You mean to tell me your build would/will last? Did i mention how crappy DSM's look lol? 38PSI L M A O!!

Beans
07-02-2012, 02:46 PM
Understood and agreed. However, DSM's are pretty much cheap and ugly as ISH right next to any year camaro. Anyone can make a dsm fast. They are so cheap and have such an issue with crank walk. Let me ask you, why don't you still have your cheap @ss DSM? Let's weld our tranny's everybody lol.

Anyone can make a DSM fast in the same way that anyone can make an LSx or Honda fast.

Crankwalk was only an issue on 7-bolt cars and even then, it's relatively rare.

And no one welds transmissions. Drag guys weld the center diff to smooth out the launch and prolong driveline life.

An s2k with proper build will hold up with 500+hp A LOT LONGER than any DSM (forged internals). Bank on it. Don't question me either.

DSMs also have forged internals, genius.

The quickest and fastest stock block DSM. 9.2@154. What's the fastest stock motor s2000?

http://www.youtube.com/watch?v=inHD2ND32gg&feature=player_embedded

The fastest drag s2k is sitting @ 7.5 @ 180something in th 1320. It didn't need awd to reach that (NOR sheperds racing anything lol) all while looking and sitting much prettier than a dsm lmao. Not to mention the recent broken record for a stock block s2k just reached 800 rwhp...

That's MUCH slower than the fastest DSM. If you knew anything about drag racing, you'd know that AWD doesn't help, it hurts on the track... which why the fastest DSMs are RWD.

What does that 800rwhp S2000 run? Probably slow as shit because it takes a weekend to spool and doesn't make enough torque to tighten lug nuts.

Let's not get too boastfull about your crappy DSM.

Is that your car in the video?

If so i suggest you learn how to drive before talking shit to anyone.

What guy even buys an S2000 and then brags about its merits as a drag car?

Your car was built for women and effeminate vegetarian men to cruise around town and try to look cool with the top down, and occasionally make a little VTAAAAK noise so people would think it's fast.

Here's a well built S2000. You know what they did? Put a DSM engine in it so it would go fast, and then put a honda badge on it to fuck with people like you.

http://i25.photobucket.com/albums/c75/PhatS2000Turbo/photo_131707674001c66f2.jpg

BBAP2
07-02-2012, 02:49 PM
Anyone can make a DSM fast in the same way that anyone can make an LSx or Honda fast.

Crankwalk was only an issue on 7-bolt cars and even then, it's relatively rare.

And no one welds transmissions. Drag guys weld the center diff to smooth out the launch and prolong driveline life.



DSMs also have forged internals, genius.

The quickest and fastest stock block DSM. 9.2@154. What's the fastest stock motor s2000?

http://www.youtube.com/watch?v=inHD2ND32gg&feature=player_embedded



That's MUCH slower than the fastest DSM. If you knew anything about drag racing, you'd know that AWD doesn't help, it hurts on the track... which why the fastest DSMs are RWD.

What does that 800rwhp S2000 run? Probably slow as shit because it takes a weekend to spool and doesn't make enough torque to tighten lug nuts.



Is that your car in the video?

If so i suggest you learn how to drive before talking shit to anyone.

What guy even buys an S2000 and then brags about its merits as a drag car?

Your car was built for women and effeminate vegetarian men to cruise around town and try to look cool with the top down, and occasionally make a little VTAAAAK noise so people would think it's fast.

Here's a well built S2000. You know what they did? Put a DSM engine in it so it would go fast, and then put a honda badge on it to fuck with people like you.

http://i25.photobucket.com/albums/c75/PhatS2000Turbo/photo_131707674001c66f2.jpg

You are FAIL lol. I'd slap the ish outta you...

Beans
07-02-2012, 02:58 PM
You are FAIL lol. I'd slap the ish outta you...

Sure you would.

You're probably a passive-aggressive spineless little bitch when you're not behind a keyboard.

Sweet_SS
07-02-2012, 02:59 PM
You are the pee wee here who got defensive by someone just simply showing some vid. Be honest with yourself..You mean to tell me your build would/will last? Did i mention how crappy DSM's look lol? 38PSI L M A O!!

My build would/will last? My Talon ran when I sold it. Actually, it ran for over two years on that setup, even when I sold it. Can you say the same?

Sweet_SS
07-02-2012, 03:08 PM
Anyone can make a DSM fast in the same way that anyone can make an LSx or Honda fast.

Crankwalk was only an issue on 7-bolt cars and even then, it's relatively rare.

And no one welds transmissions. Drag guys weld the center diff to smooth out the launch and prolong driveline life.



DSMs also have forged internals, genius.

The quickest and fastest stock block DSM. 9.2@154. What's the fastest stock motor s2000?

http://www.youtube.com/watch?v=inHD2ND32gg&feature=player_embedded


Here's a well built S2000. You know what they did? Put a DSM engine in it so it would go fast, and then put a honda badge on it to fuck with people like you.

http://i25.photobucket.com/albums/c75/PhatS2000Turbo/photo_131707674001c66f2.jpg

BBAP2, you just got owned

bad67ls
07-02-2012, 03:26 PM
" owning a fast import is like coming out of the closet...at first everyone is in shock, but in the end...you are still gay"

Sweet_SS
07-02-2012, 03:51 PM
" owning a fast import is like coming out of the closet...at first everyone is in shock, but in the end...you are still gay"

But one thing is true...you still loose LOL So your saying your cool with loosing to something gay :eyes: Its comments like this that make me wish I hadn't sold it...make you look bad.

adamantium
07-02-2012, 04:09 PM
" owning a fast import is like coming out of the closet...at first everyone is in shock, but in the end...you are still gay"


If an import is gay and it would drag you, what does that make your car?


Anything fast deserves respect.

inb4 cheeky torque comment.


But one thing is true...you still loose LOL So your saying your cool with loosing to something gay :eyes: Its comments like this that make me wish I hadn't sold it...make you look bad.

lol exactly how i feel about honda's. Sometimes i wish i could've kept it and thrown the setup i was piecing together in it.

bastard dsm
07-03-2012, 01:45 PM
Lol...these all know it all dsm masters. Well my stock block dsm making 500+hp on 93oct and has been running for 2 years daily driven will walk anything on a daily basis. Crank walk is something dumb ass would say that doesn't know any better.

bastard dsm
07-03-2012, 02:18 PM
hmm..mirage $75, rebuilt stock motor $500, assembled the rest with spare parts laying around the shop= 400hp on 93oct @ 22psi on a mustang dyno and walking 600s on the highway. Now 6262 turbo, bigger ic and a ems car makes 560hp @ 26~27psi 600hp @ 30~32psi and is a 140+ trap car. Still on the same motor over 2years later, doesnt burn oil, grind gears or make weired noises. So when did i spend loads of money?

BottleFedZ346
07-03-2012, 02:48 PM
Claiming every DSM has crankwalk = clueless....

My stock bottom end 6 bolt made 530whp on 30lbs and e-85, fun little car for sure!

OP: Quick car, always had a soft spot for mirage's!

AnnivSS
07-03-2012, 04:04 PM
Theres a couple of local DSM's (well one DSM and one Evo) they spend their evenings dragging plenty of other labels down the road. IIRC the DSM (mid 90's galant vr4) is making around 700whp and the Evo is making a little over 900whp. Point being, anything with enough time and money can be fast. Respect needs to be given where its due.

Sweet_SS
07-03-2012, 05:46 PM
I'm loving all the DSM owners in here. This is awesome.

adamantium
07-03-2012, 05:58 PM
lol

bad67ls just got decimated.

bad67ls
07-03-2012, 09:32 PM
bad67rs didnt get anything but a laugh from you import nut riding pussys. "if i didnt sell it to buy this 13 second camaro i'd..." hahahaha. what a bunch of tools.

bring it on bitches. long island new york. we aint hard to find. your balls sure seem to be though.

adamantium
07-03-2012, 10:28 PM
bad67rs didnt get anything but a laugh from you import nut riding pussys. "if i didnt sell it to buy this 13 second camaro i'd..." hahahaha. what a bunch of tools.

bring it on bitches. long island new york. we aint hard to find. your balls sure seem to be though.

lold umad bro. Go into another thread and pump your chest out some more bro, looks like that's all you do.

BlackGasGuzzler
07-03-2012, 11:11 PM
bad67rs didnt get anything but a laugh from you import nut riding pussys. "if i didnt sell it to buy this 13 second camaro i'd..." hahahaha. what a bunch of tools.

bring it on bitches. long island new york. we aint hard to find. your balls sure seem to be though.
Blah, blah, blah :givesfuck

bastard dsm
07-04-2012, 12:09 AM
Bad67ls, what does your car trap???1/8 or 1/4

BottleFedZ346
07-04-2012, 01:48 AM
bad67rs didnt get anything but a laugh from you import nut riding pussys. "if i didnt sell it to buy this 13 second camaro i'd..." hahahaha. what a bunch of tools.

bring it on bitches. long island new york. we aint hard to find. your balls sure seem to be though.

For a car that only traps a measly 130mph you seem to have a bad case of diarrhea flowing from the mouth.......:eyes:

Beans
07-04-2012, 10:25 AM
For a car that only traps a measly 130mph you seem to have a bad case of diarrhea flowing from the mouth.......:eyes:

Bahahaha

This clown comes in here acting like he's got the fastest car on the planet and in reality the OPs Mirage would pull buses.

Fucking classic!

Sweet_SS
07-08-2012, 09:55 PM
bad67rs didnt get anything but a laugh from you import nut riding pussys. "if i didnt sell it to buy this 13 second camaro i'd..." hahahaha. what a bunch of tools.

bring it on bitches. long island new york. we aint hard to find. your balls sure seem to be though.

13 second Camaro :eyes: Homo, still building my forged LS3, which is turbo'd. I would love a run with you when its finished :D I will beat you clown with my slow car.

http://i50.tinypic.com/ix5ojr.jpg

This is a local guy that bought mine. Let's see you do this
http://youtu.be/MlL1Teq0XV0