lq9 rebuild- needs some tips for building for boost
07-01-2012, 12:51 AM
#1
TECH Regular
Thread Starter
iTrader: (21)
Join Date: Feb 2009
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
lq9 rebuild- needs some tips for building for boost OK so here's the run down, I bought a 6.0 lq4 was gonna do a forged 370 but am now gonna test the waters with stock stuff. Found a set of lq9 rods and pistons for $80. Next I have head and main studs for the block. My question is what bearings and rings should I run? The heads ill be running are LSA's from a new cts-v. Holley hi ram intake followed up with a custom cam. So pretty much need to know a good set of rings and bearings and also what is a good gap for the rings? Looking to make as close to 850 as possible on e85.
07-01-2012, 12:58 AM
#2
TECH Regular
Thread Starter
iTrader: (21)
Join Date: Feb 2009
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Oh looking to push the boost up pretty high... well as high as the stock stuff will go, will be running the new dominator efi and a 4l80e. Any and all thoughts and inputs are welcome!
