When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm doing a stand alone harness and trying to thin it down. Can you tie the inj power wires together? I see stand alone harnes's only have 4 fuse panel.
I have them both tied together in my S10, 15A fuse on it and haven't had any problems. I used a pin in the fuse box that had two 16ga wires coming out of it instead of the normal one wire ones. I did that to ensure proper wire size.