Florida Members - A Little dyno work today

Well, Today was a long and hot day to say the least. We started off with some LT1 action this am. We did tech member's 95sscamaro's ride. Car was tuned via another tuner and had a few hick-ups in it. After some tweaking and tuning she was a much happier car to drive. I'm sure Cory will chime in too. Here's the graph from the hot day in the shop.
http://i912.photobucket.com/albums/ac328/DaytonaDennis/Dyno%20Runs/CorySummersdyno.jpg

Whats happening up top at about 5700 rpm?

Looks like a stout LT1.

very nice dennis! 355? 383?

355 LE1 heads

Whats happening up top at about 5700 rpm?

Looks like a stout LT1.

We were running into what I think are some ground issues in the car, had the map sensor values moving around. But none the less was much happier driving and making power thoughout the pull .

After a slow start to the afternoon and many little road blocks to deal with along the way, we finnally got Marco Tellez's 240sx LS1 swap ( AKA DriftHappy on here ) fired up and making noise. Basic run down, 98 LS1, cam, custom headers and a few other updates. We were going for a very soft tune to help keep it alive in the hard and crazy drifting conditions. Different headers and an LS6 to come into play in the near future also. After a few months being down for the swap, it's almost ready for the track again.

http://i912.photobucket.com/albums/ac328/DaytonaDennis/Dyno%20Runs/photo2.jpg


http://i912.photobucket.com/albums/ac328/DaytonaDennis/Dyno%20Runs/photo.jpg


http://i912.photobucket.com/albums/ac328/DaytonaDennis/Dyno%20Runs/240run4.jpg

We were running into what I think are some ground issues in the car, had the map sensor values moving around. But none the less was much happier driving and making power thoughout the pull .

I showed the graph to the engine builder and he said it could be a little valve float.

Could be, I didn't want to knock on anyone else's work....

I have very happy with the job that Dennis did on the tune, the overall drivability of the car is great. He is a real standup guy, I would recommend Dennis to anybody that needs a tune.

http://www.youtube.com/watch?v=0MVgzdOR9uc&feature=youtu.be

Glad to see some good results! I havent seen this car around in a while, was wondering where it went....

It is good to see Jim Smith is still tweaking LT1's out that way and doing good. Tell him I said hi when you see him next.

Mike Norris

Will do Mike.

Cool!

video of my 240 doing work in michigan! dennis is the best tune guy i know! super nice guy, not dealing with anyone else from now on :) http://www.youtube.com/watch?v=9ctpde0bIwg&feature=autoplay&list=UUp2FY9HpWJinYhow3E_Dr0w&playnext=1

http://i539.photobucket.com/albums/ff359/proj3ctx/b5e61f68.jpg
http://i539.photobucket.com/albums/ff359/proj3ctx/ffe148a3.jpg
http://i539.photobucket.com/albums/ff359/proj3ctx/2ca67fc4.jpg
http://i539.photobucket.com/albums/ff359/proj3ctx/a398324a.jpg
http://i539.photobucket.com/albums/ff359/proj3ctx/f2ec3e6f.jpg

forgot this cool video :

http://www.youtube.com/watch?v=5MpqFnEW6zc

Sorry wrong first vid lol, that's not the car lol