Arp
07-03-2012, 06:42 PM
#4
Teching In
Join Date: Sep 2008
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I have the same ones and I am holding the instructions in my hand right now.
Preload (torque) Recommendations:
(A) Torque valuse are based on 75% of the fasteners yield strength. use the manufacurers torque sequence but do not use the engine manufacturers torque specs. Torque the nuts to 70 ft lbs for arp moly assembly lubricant or torque to 85 ft lbs with 30wt motor oil.
Preload (torque) Recommendations:
(A) Torque valuse are based on 75% of the fasteners yield strength. use the manufacurers torque sequence but do not use the engine manufacturers torque specs. Torque the nuts to 70 ft lbs for arp moly assembly lubricant or torque to 85 ft lbs with 30wt motor oil.
07-03-2012, 11:36 PM
#5
I have the same ones and I am holding the instructions in my hand right now.
Preload (torque) Recommendations:
(A) Torque valuse are based on 75% of the fasteners yield strength. use the manufacurers torque sequence but do not use the engine manufacturers torque specs. Torque the nuts to 70 ft lbs for arp moly assembly lubricant or torque to 85 ft lbs with 30wt motor oil.
Preload (torque) Recommendations:
(A) Torque valuse are based on 75% of the fasteners yield strength. use the manufacurers torque sequence but do not use the engine manufacturers torque specs. Torque the nuts to 70 ft lbs for arp moly assembly lubricant or torque to 85 ft lbs with 30wt motor oil.
but I could be mistaken
07-04-2012, 10:13 AM
#6
Teching In
Join Date: Sep 2008
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts