View Full Version : 1990 RX7 LS3 V8\Viper T56

07-03-2012, 10:55 PM
1990 FC GXL (Swapped)

Engine - 2007 L92 Escalade long block. 6.2 Liters
Transmission - 2002 T56 with internal upgrades and Viper conversion, Pro5.0 shifter
Power steering -Stock, works great. LS1 pump
Suspension - Stock GXL adjustable. NEW ROTORS and PADS
Wheels - 2000 Mustang GT in CHROME
Tires - NEW 225 in front and 275 out back
Conversion mounts - Hinson Motorsports, Poly isolators
Cooling System - JTR mount, Corvette Radiator
Exhaust - Trailblazer SS manifolds, custom 2.5" stainless dual pipes with Large magniflow cans and an X-pipe
Rear End - STOCK 1988 Turbo II rear differential
Fuel system - Supra Denso pump, stock lines combined with Teflon braided line and AN fittings. Corvette FPR
Body - all stock GXL, Original flaky white paint. No body damage
Interior - Stock(blue) Original 9 out 10 condition
Wiring - Stock Body wiring, Engine managment and harness is a GMPP kit for swaps. Truck alternator (big case)Optima Battery in passenger bin, mounted with a billet case.

The Bad - No A/C, No rear Wiper, no stock Tach, oil or Speedometer function. Surface rust where paint has flaked off. Passenger door interior handle broken, No radio or idiot lights.

Rebuilt stock bottom end, new Bearings, Crank 0.010 under on all surfaces. Stock pistons, rods, rings etc.
Melling oil pump
VVT eliminated
Aftermarket Cam slightly lumpy big lift custom grind
Ported LS3 intake manifold
Ported heads L92
Ported Throttle body (DBW)
2002 F-body Accessories

Asking price - $10,000 or trade?

Let me know if you have any questions, details kept concise here for the sake of easy reading Sold as-is

Build thread here- (details for cam specs, headflow, and minutiae of swap)

video -

08-28-2012, 03:58 PM
also consider selling the shell MINUS the engine, transmission, slip yolk and ECM/harness.

Include the

-Center mount gauge pod (empty)
-JTR cooling setup
-T2 diff
-Hinson mounts/ poly cushions
-Stainless exhaust with manifolds
-Power steering kit minus the pump(TurnOne restrictor goes with the car)
-Fuel system
-Clutch MC and lines
-Everything in the car

-GXL NA diff
-console mounted idiot lights
-stock oil cooler
-stock a/c parts

Drop in your LS engine/T56
Wire in your ECM and harness


08-29-2012, 11:01 AM
PM me price for engine, transmission, slip yolk and ECM/harness.

04-05-2013, 11:33 PM
This car is being parted.

See here for details-

Engine -

T56 viper -

04-21-2013, 04:33 PM
Project tear down!

04-23-2013, 12:53 AM

05-04-2013, 11:08 PM
what are selling the tranny for? and would you ship to canada?

05-07-2013, 11:17 AM
what are selling the tranny for? and would you ship to canada?

Already sold it and yes it's going to Saskatoon actually! :eek2: