View Full Version : Ws6 formula twin turbo drag car!

07-10-2012, 08:51 AM
2000 ws6 formula drag car. I have alot of time and money in this car and i hate to sell it but some family things have come up so it looks like its gotta find a new home.

6.0 block ( bored, honed, decked)
JE pistons w/ DLP pins
K1 rods w/ arp 2000 bolts
Factory 6.0 crank
ACS bearings ( coated)
Total seal rings
1/2" head studs w/ ls9 head gaskets
block is 1/2 filled
aeromotive belt driven fuel pump with regulator
Pro flo intake with wilson TB and 100lb inj's
Custom truck manifold twin turbo kit ( built by me) w/ treadstone IC
Twin precision 6266 billet journal bearing
Twin 40mm tial wastegates and twin bovs
Pa tube k member with tube lower control arms
Brand new front aerospace brakes
Billet specialties street lites with hoosier 275's out back
9" rear with moser alum center section w/ spool and 35 spline axles
Umi anti roll bar
Spohn torque arm and lower control arms
QA1 coil overs up front and shocks in the back
Rossler powerglide trans with pro brake
wolfe 10pt ms certified 8.50 roll cage
Kirkey seats

Im sure im missing some things here i have alot in this car. Im asking 20k Its an easy 5 second 1/8th mile car its been mid to low 6's on 9#'s of boost so far. I have a pic of it from the last track outting ill post some more later today.

Thanks, Aaron

07-10-2012, 11:58 AM
Might also part the car out havent decided yet. PM if you interested in buying the car as a roller, the turbo kit, or the complete engine.

07-16-2012, 04:31 PM
Bump ill get some better pics up later this week. I guess we ran some trash through the injectors and trashed a few should be back later this week.

Thanks, Aaron

07-30-2012, 07:21 PM
Sorry it has taken so long to get this car back together. I got the run around on my old injectors should have some new ones in a few days and ill get more pics and some idle video up

08-01-2012, 02:23 PM
Bump new injectors will be here tomorrow and ill get some pics up on sat. I may be interested in trades of same or lesser value hit me up if interested.

08-01-2012, 02:56 PM
look forward to it
good luck!

08-14-2012, 04:14 PM
Sorry its taken so long my life has been kinda crazy had a beautiful baby girl a couple of weeks ago and finally got a set of injectors in it here are some pics of the car cleaned up.... ill get some pics of the interior and under side here this evening. 20k OBO pretty motivated to sell so let me know if you have any questions. Thanks, Aaron

08-14-2012, 10:50 PM
Bump! Best offer takes it!

08-15-2012, 08:10 AM
Any trades

08-15-2012, 08:26 AM
I may trade PM with what you have.

08-15-2012, 08:37 AM
Here are some interior and underside pics.

08-15-2012, 08:17 PM

08-16-2012, 08:29 AM
Bump! May part the car out.... that would really be a last resort type of thing... If i dont get any intrest in it complete i may sell the car rolling, complete engine, turbo kit etc...

08-16-2012, 10:04 AM
Trade on 97 corvette ?

08-16-2012, 09:06 PM

08-19-2012, 08:09 AM
Bump! 18k OBO

08-19-2012, 08:48 AM
Are you willing to show the car locally?

08-19-2012, 11:01 AM
If someone is in the Midland/Odessa area i have no problem showing them.... If you want me to take the car somewhere it would depend on the situation.

08-19-2012, 03:13 PM
What heads on it or did I miss it in the post

08-19-2012, 04:17 PM
PM sent again

08-19-2012, 08:25 PM
Just some 317's with some work..... we did the 1/2" studs in the block with the ls9 head gaskets.

08-20-2012, 12:36 PM

08-21-2012, 08:17 AM
17K OBO. Bump!

08-21-2012, 12:56 PM

08-21-2012, 07:54 PM

08-22-2012, 04:20 PM

08-23-2012, 11:06 AM

09-11-2012, 10:09 AM
Parting the car out..... Check my other threads!

09-12-2012, 12:08 PM
how about a trade on this