Blwn_by_Twins

iTrader: (6)

Trying to decide on a cam to go with. Future plans for the car include 370ci forged motor and a procharger, but that's not anytime soon. Car is pretty much where it's going to be for a while. Will be adding TF as cast 220 around Nov, but that's about it. I was thinking about the Brute Speed blower cam, but wasn't sure if that would be a wise decision with my stock 98 heads. Here is my current setup...

98 T/A M6 car w/ 3.90's
SLP lid
Z06 MAF
LS6 intake
ARH 1-7/8 lt's & ORY
Magnaflow CB
Nitrous Outelt Plate kit

So can anyone offer any good advise towards a cam/

PREDATOR-Z

224/234 .581/.598 114+4 lsa

Blwn_by_Twins

iTrader: (6)

Thanks for your input, but any more info on that setup? Your spec or just have experience with it?

PREDATOR-Z

my specs taking into account future supercharging. Should peak at around 6200rpm and carry well into 6600+ rpm

Blwn_by_Twins

iTrader: (6)

That wouldn't call for fly cutting would it? I will probably do valve springs, retainers, and push rods though.

PREDATOR-Z

If cam is ground as per the specs I gave, no flycutting at all, plenty space.

Blwn_by_Twins

iTrader: (6)

Okay, thanks. I know nothing about cam specs. lol